Jump to content
SAU Community

Name And Shame

staticc

By staticc,
in New South Wales

 Share

Recommended Posts

FordyR31 Mentor

FordyR31

Posted
Posted

Its scary to realise how many people don't know basic road rules and think they have right of way.. This OP was doing the speed limit, he overtook a truck which should be doing less and in this case was as the OP was overtaking it, he isn't doing anything wrong (until he slows down) but the tard in the 33 was speeding and tailgating. If the knobhead 33 driver wasnt a tool and was doing 110 he would have passed the truck anyway. Sure it was wrong to slow down but these days there are that many wankers on the roads who do not know or care for the rules it ruins a simple drive to work/shops etc. The dumb shits bagging out the original poster need to look at themselves and just say out loud, "Im a shit driver with no road courtesy for others". Too much Need For Speed and Autobarn dreaming.

Redline_GTR Veteran

Redline_GTR

Posted
Posted

If i may just add my 2c ...

The law based on the RTA (or TRMS or whatever you want to call them now) is to actually slow down when you have someone tailgating or "being up your ass"

This is so if you indeed need to slam on the brakes for whatever reason there wont be another car in your passenger seat when you do.

Dont ask me exactly where this is in the book/website but this exact question was part of my license test several years ago.

arrydjay Community Regular

arrydjay

Posted
Posted

How do you know that the guy wasn't in a hurry for some kind of emergency? Its pretty simple... The right lane is for overtaking, and if someone comes up behind you just move over... Don't get the shits that someone is going faster than you and slow down and block them with a truck and then come on a forum whinging about it...

GTR-N1 Grand Master

GTR-N1

Posted
Posted

^^^ Correct

John Cadogan media advisor for NRMA is a big stickler for TRAFFIC FLOW.

Sure, drivers may occupy a spot according to their perceived rights, but responsibility will always exceed rights!

Responsibility for improved traffic flow is to complete your own overtaking manoeuvre and pull back into lane 2 or 1 in a multilane highway.

John is also an advocate for "P" platers to be able to go up to maximum speed limits on highways/motorways to not disrupt traffic flow!

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

^^^ Correct

John Cadogan media advisor for NRMA is a big stickler for TRAFFIC FLOW.

Sure, drivers may occupy a spot according to their perceived rights, but responsibility will always exceed rights!

Responsibility for improved traffic flow is to complete your own overtaking manoeuvre and pull back into lane 2 or 1 in a multilane highway.

John is also an advocate for "P" platers to be able to go up to maximum speed limits on highways/motorways to not disrupt traffic flow!

Too bad that all is logical, because RTA has an anti-logic policy :angry:
T4NK Experienced

T4NK

Posted
Posted

HAHAH that is awesome, i would shake the cops hand for that, i drive the F3 from the coast to sydney and back every day for work and the amount of times im in the left lane going faster then the ppl in the right lane is a joke, and i think the guy with the camera in that is also a cop, have a look at the Yellow vest he has on in the mirror has the blue and white checker on it :D

Redline_GTR Veteran

Redline_GTR

Posted
Posted

Ha thanks for that Terry! Exactly we need more of that!

I think everyone is in agreement here that yes the overtaking lane is for overtaking. Not sitting there in your own world.

Alex though I think was saying it was the acts of what the driver did that shouldn't be condoned as in the aggressive behaviour or "road rage".

I think he admitted to knowing what he did wasn't right but rather just at a point of frustration which really is not an excuse and only adds to the problem.

However, I also agree that the RTA does not help in these sorts of things at all.

While it is an offence which holds a fine and 3 demerit points, tailgating is still an issue.

And this becomes an even greater issue when people don't move out of the right/overtaking lane.

I think Terry summed it up the best in the statement of Traffic Flow and that's what we should be aiming for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...