Jump to content
SAU Community

Recommended Posts

Hey man

Found this on import monster. Geez took me an hr but think i found what you are looking for. Cruise dash with bout 70'000 on the clock. Estimated cost inc shipping to melbourne depot is 174.66 approx. Hope this helps.

http://www.importmonster.com.au/view?url=http://page16.auctions.yahoo.co.jp/jp/auction/u44430325&thumb=http://auctions.c.yimg.jp/img313.auctions.yahoo.co.jp/users/5/8/7/3/pochisama00-thumb-131340781919166.jpg&title=M35%20ODO

nice one dude,

it looks like its out of a later model car, but its deffinately what i need.

although i can't see if it has screen or not.

cheap too, the freight and charges are the killer hey.

maybe i should buy some coil overs and intercooler kit at the same time.

Defintly the hdi gt2 kit. Best upgrade. Yeah shipping from japan is always a killer. You could contact seller and ask for that product number on back. Coilovers is also great investment. Not for me though as i love the ride mine has but as i said today very iterested in ypur rsr springs to get home lower and stiffer.

turns out that add is to have the km's on your dash 'modified' not actually a dash for sale.

im sure everyone will be surprised to read this.........

yeah i need a series 1 dash with cruise and Radar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...