Jump to content
SAU Community

Recommended Posts

Hi guys, iv got an R33 GTS-T series 2 its stock as a rock with a CatBack and Splitfire coilpacks, i want to put a FMIC, Modify the stock air box, new fuel pump and get it NISTUNED with a boost controller running like 10-12psi......

should i be getting a bigger dump-pipe/front-pipe/cat or would i not worry about it untill i go bigger turbo and cams and blah blah blah..??

Thanks!!!!

Link to comment
https://www.sau.com.au/forums/topic/416984-rb25det-exhaust-question/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

yes get a 3inch bellmouth dump...great little upgrade for less than 200$...get intercooler, fuel pump...But nistune isnt great with r33 so unless you can get one real cheap you're better off with a full standalone like PFC, Adaptronic, Link etc ... I wouldnt bother modifying the stock airbox much ...I suck 500hp thought mine no worries :D

nah mate, this is the one you want....they pop up in for sale section occasionally too if your patient..

http://justjap.com/s...316&cat=&page=1

then add this

http://justjap.com/store/product.php?productid=19402&cat=&page=1

thats about far as cheap upgrades go, after that its turbo, ecu, injector time and you will spend 3000$ pretty quickly..

Hypergear was selling Adaptronics cheap with hiflows not sure if he still is but for around 2000$ its your best bet....

that dump/front looks good, ill get that! :)

and they have a black cooler and piping similar to that!

http://justjap.com/store/product.php?productid=19944&cat=339&page=1

i want it to be all black :)

thanks for your help mate! much appreciated

sounds good ,black is the way to go specially in Vic..:thumbsup:

many say the blitz is a better cooler , you could always paint it black...that said I have a cheap china cooler and it works fine...

Any filter is good as long as its clean.. I have K&N filter too...they are the same filter as a VN commodore so cheap enough too ...Think I paid 60$ on sale at repco

yeh and im on my p's too :/ haha!

sounds good mate, thankyou!! :) :)

ok I probably didn't need to know that ;)

aim to keep the car looking clean and as stock as possible, outside and in and don't drive like a knob you never know what you will get away with...

build another drift hack you probably wont last a week... :rofl: then again you might...who knows

haha ,love it :thumbsup:

I hate mazda's and golfs! lol they are either cutting me off or tailgating me, thinking they deserve street cred...( yours is different though i hope)

id swap the return flow intercooler for the other type , you can use the hole there for an awesome cold air intake with a 4inch intake pipe,

also id think what turbo your going to get and how serious you are before the dump, if hypergear stick with your $200 pipe..

Edited by AngryRBGTX

4" cold air intake through 2.5" hole?

oh i forgot to mention, i used a tool on the drill and made it 4inch, then you can get some rubber trim to make it look nice and stock looking and hook up your 4inch pipe :)

its a very good supply of cold air , might need to change the filter more often though from the increased dust and dirt being blown in

Edited by AngryRBGTX

oh i forgot to mention, i used a tool on the drill and made it 4inch, then you can get some rubber trim to make it look nice and stock looking and hook up your 4inch pipe :)

and whats vic popo gunna say when they see your big hole and more than 1 Intake mod ??

hes gunna have hard enough time getting a turbo past them as it is let alone a turbo with a bunch of "awesome" mods..

..

and whats vic popo gunna say when they see your big hole and more than 1 Intake mod ??

hes gunna have hard enough time getting a turbo past them as it is let alone a turbo with a bunch of "awesome" mods..

..

they'll say.. mm nice work man, like what youve done there. haha.. jokes, sorry i forgot bout the strict vic popo...

police have seen mine up here and were actually admiring it, i take it back go for the return flow..

Edited by AngryRBGTX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...