Jump to content
SAU Community

Recommended Posts

Hey, basically I’m after some advice for my cars paint job.

I and trying to figure out wat will fix the following problems, weather it be taking my car to a detailer, maybe cut n polish or getting a another clear coat not sure wat will fix the following and who to see about.

I want to get rid of the minor defects that manage to piss u off the most.

Ø Pin dents – got 1 or 2

Ø Scratches to the paint from doors ect.

Ø Minor paint chips

Ø Graze on the door from someones trolley.

Now the things that really bug me

Ø I have kind of deepish swirl marks all over the car, they come out really harsh looking in the sun

Ø Bonnet has a lot of swirl marks and looks like it has less of a clear coat then the rest of the car, like the polish or wat ever has been stripped down a little.

Ø Roof – worst of the worst, my roof is starting to fade a little, has minor cracks and major swirl marks on it. It also looks like a lot of the clear coat has been taken off it.

Now short of getting the car resprayed, wat options does one have? Any advice would be great. And names and contacts for people that would do a decent job would be great (hills area would be good but anywhere round perth is cool)

Also I’m after seeing someone to fix these problems not a home job that one does, such as using scratch x ect.

Link to comment
https://www.sau.com.au/forums/topic/41748-paint-problems-advice-needed/
Share on other sites

A very good friend of mine works for Car care.. mobile service. For thos of you that have seen my car (especially on sunday for the photo shoot) my cars paint is as shiny as the day it left the showroom.

He had a 89 model blue VN commodore that was meant to be blue but had faded to grey!!! 3 hours later his car was back to a beautiful shade of blue again.

You all know how protective of my car I am so when i use someone to do something they have to be good.

Pm me if ya interested..... i thoroughly recommend him and i think he could get that beautiful shiny colour back up and fix up most of those probs!!!

I have been in talks with him to get all SAU members very cheap prices..... cheaper than most detailers........

I will prob write up a thread in regards to it soon once i get more details....

Thanks Aidwin:-)

OK guys, i will organise a bit of a group buy so to speak....

What exactly are we after....

wash plus small cut & polish and buff...... that should get out the swirl marks and generally bring the paint up to its gleaming self again, unles if ya paint is BADLY faded then you would go for a deep cut.

interior aswell??

so far Ineterested i have:

Nugget

Bless_you

Jolinator

Godfather

I would be happy in saying the above mentioned of what to get done will be Saffice but I am sure Patrick will do that little bit extra.... HE IS A PERFECTIONIST!, you will see what i mean with his van!!!

Just let me know if you guys want interior done aswell.. or just the paint.... as there is a few people I am sure the prices will be VERY cheap.... normally he said he would do my friends a cheaper than normal price but now theres a few we could prob get even more cheaper..

Hi guys. A subject that interests me too. I also have a niggling scrape on the bottom of the passenger door which is starting to rust (Aaagggghhh!) :D . So I need to do something soon. Not sure that Car Care will do painting of stone chips and this type of thing. I think they just do the cut and polish. Am I wrong? If they don't, who is recommended for touch up prior to a polish?

Also, as a matter of interest, the guy who owns Car Care has a beautiful Supra Aerotop, manual. :aroused: It is red (the worst colour for fading in the sun) and has "Speedshine" written on the flanks. It looks fantastic.

25GTT - pm on the way.

Cheers.

around the $170 mark is what you would NORMALLY pay!!

I can assure you he is going to do a LOT better deal than that..... he is been a very close friend of mine for 10 years and loves skylines as much as what i do he will do us a very good price....... he should be paying us to detail our cars! ahhah!!

OK he is going to call me tomorrow with exact prices for this! sorting it out at the moment :-)

he is going to quote us for wash, cut & polish, & buff....

the materials he uses are meguirs and even better stuff.... so should be good.

Dan put me down as interested too.

If he can shine up a black car i'll personally kiss his feet.... when i had my accident the panel beater had my car detailed but the detailer didnt get all the polish off my car now i got all these white spots i cant get rid of. :D

Lauren put it this way,

I went to SST the weekend before the photo shoot, i was teased by Paul and the rest of the posse becuase of my car being a show car and being so frickin dirty!!

Paul and Aidwin were both pretty impressed as to how it still gleams. Patrick spent 6 hours on it!!!!!!!!!!! poor bugger but it looked like it had just come out the showroom!!!!

OK guys I have now received a price range from Patrick.

For a full maximum polish taking anyting up to 6-7 hours you would normally look at $220.

He has said $150 for a job such as this. Now a normal wash and small cut polish plus buff looking at $170....... he is looking at $100.

Basically $100 - $150...... we have managed about 25 - 30% off!!!!!!

For those that want this please PM me for his number he is expecting your phone call. He is a mobile service so he can come to you wherever you are. He has asked that he does it on a saturday as it may take some time to give your car love and affection.

So basically on a saturday he can come to where ever you are and expect to pay $100 - $150 as to how full on you want it. YOU MUST SAY YOU ARE FROM SKYLINES AUSTRALIA when talking to him otherwise lookin at the $220 mark!

Everyone PM me away!!

dan: i want to get all kinda liek paint scracthes off, so it look nice and clean etc...good paint job n that, cos if i read correctly thats wat it does, then well im in to....

need to just touch up places on front bar and the back on the bottom etc.....

just want to make it shiney....

put me down, and can u pm me or just reply in this thread

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...