Jump to content
SAU Community

Recommended Posts

Hey,

Up for sale is my 1996 nissan skyline series 2 r33 gts-t in KR4 silver located in the ACT. It Currently has 112,xxxkms on the clock and the condition of the interior seems to indicate that is pretty accurate, but who ever really knows. It is registered until auguts 2013 and Overall the car is in great condition, putting out 248rwkw on 18psi tuned by DVS Jez. It has few little stone chips etc on the front bar but this is to be expected with a car this age. I have owned the car for about 2 years and it was practically stock when i bought it. All the mods are less than a year old (approx 5000km). The engine bay still looks stock as a rock except for the strut brace and the car is at a reasonable height so there is no trouble with the police (i have never been pulled over besides RBT’s)

The only issue i can think of is the spigot bush wasn’t replaced (rookie mistake) when the clutch was done and it can be a little noisy on downshift if you don’t rev match.

It is serviced every 6 months or 5000km with motul 10w40 synthetic oil and is currently running redline diff and transmission oil. Always run on 98 petrol.

Current mod list:

Ecutalk consult port display

Nistuned z32 ecu

Greddy profec b ebc

Hypergear r34 hi flowed turbo

JJR bellmouth SS dump/frontpipe

Fujitsubo catback exhaust (nice and quiet)

80mm metal turbo intake pipe (made by scottynm35)

Z32 Maf sensor w/tomei plug

Yellowjacket coilpacks

Apexi pod filter

Pod filter enclosure

Blitz turnflow FMIC (painted black)

Nismo 555cc injectors

Nismo intank fuel pump (wired for alternator voltage through a relay)

Jim berry full monty carbotic clutch

BC racing br coilovers

Fr/r whiteline adjustable sway bars

Whiteline subframe pineapples

Nismo front strut brace w/ master cylinder stopper

Rear strut brace

Tomei hicas lock kit (just needs the shims put in)

DBA 4000 slotted rotors front and rear

QFM hpx brake pads front and rear

17” inch rims (bit of gutter rash on the fronts)

Federal 595ss tyres

R33 gtr front and rears seats (no rips/tears, they are immaculate)

Razo gear knob

Genuine Nissan floormats

Sony head deck with 3.5mm aux cable port, Pioneer rear speakers, amp and 10” sub

Im sure i have probably forgotten 1 or 2 things, but this is the main work done.

I have most of the stock parts such as sway bars, air box/snorkel, struts, turbo heatshield, ecu , intercooler, injectors, rotors, seats, intake pipe, fuel pump, dump pipe whic you are more than welcome to have with the car if you wish to convert back to stock or whatever.

I also have a genuine Nissan kr4 r33 gtr spoiler that can go with the car if its not sold beforehand.

Pics will be up once i give it a wash and take some photos (when the weather cools down). Can get some sooner if you are serious.

Asking price is $12,500.

Any questions let me know.

Edited by Mitcho_7
Link to comment
https://www.sau.com.au/forums/topic/418074-act-kr4-silver-s2-r33-gtst-248rwkw/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...