Jump to content
SAU Community

Salutations Chaps. Northern Beaches, Sydney Here.

Shazbanger

By Shazbanger,
in Introduce yourself

 Share

Recommended Posts

Shazbanger Community Regular

Shazbanger

Posted
Posted (edited)

G'day Guys,

My names Shannon (Prefer Shaz, or Shazza) from the Northern Beaches in Sydney. I've been on here for a fair amount of time now I think, but don't post all that often. I've been getting a bit more involved recently, after the purchase of my R34 GTT, and looking to get more active in NSW events.

I've previously owned an R33 S2 with HMA533 number plates, and numerous other non Datsun branded vehicles. (GZ20 Soarer/1JZ, Liberty Wagon w/ STi conversion, KE70 drifter, etcetc)

I work as a Bank Manager at one of the big 4 banks, and also own my own business, which I run on the weekends and after hours.

My current car is relatively stock, with 70,000 genuine KMs. Has a cat back exhaust, a bucket seat, Blitz ZZR coilovers and a some Work CR Kais. Plans are for a high flow turbo, a thick SMIC with a Cryo2 setup / Nismo air shroud, EBC, and dump pipe. Ideally, somewhere around the 350rwhp mark would be nice, but more importantly, it MUST be reliable, and super responsive, as this is my daily, and I have absolutely no need for a massive, child ingesting turbo.

Hope to see some of you blokes at some meets in the near future. Doesn't seem to be many people from over on the Beaches on here so far. Oh, and excuse the dirtiness of the car in the below pics. It was a spur of the moment thing, and my car was filthy.

774920_428423990561354_15197117_o.jpg

774257_428423963894690_966858987_o.jpg

740141_428424003894686_1343168535_o.jpg

774138_428424013894685_26174073_o.jpg

Thanks guys, and look forward to contributing to this forums already sterling reputation (Yep, anchorman fan)

Cheers,

Shazza

Edited by XS80ST
Captain Natro Grand Master

Captain Natro

Posted
Posted

welcome.

very clean looking car.

just one thing,

THERE IS ALWAYS A NEED FOR A CHILD INGESTING TURBO!

its just a fact of life.

hope to see you at some events.

Not if your packing V8 Powah :P

But yer welcome mate, come hang in the wasteland with the cool kids....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...