Jump to content
SAU Community

Recommended Posts

Hi

I recently brought BC Racing coilovers for my GTT.

I have installed them and set the spring preload to 4mm.

I have set the damper 6F 4R.

I can still feel every bump in the road.

Any ideas on how to tune these better and any recommendations on the preload and damper.

Thanks

Gregzy

Link to comment
https://www.sau.com.au/forums/topic/418402-r34-gtt-bc-br-coilovers/
Share on other sites

Your dampening settings are very aggressive. I believe these have ~30 points of dampening adjustment? Try setting it at 15 front and rear and see how it drives.

No problem, will try that tonight, wouldnt it be harder suspension though

what do you know about spring preload?

You need just enough preload on the springs to make them captive.

As for dampening are you adjusting away from full stiffness? This is how you generally adjust coilovers so when you say 6 and 4 I assume that is the amount of clicks off (to the left) off full stiffness.

nah, i count all the way left as 1 then all the way right as 30.

I just done 15 clicks from all the way left.

As for the preload, i followed a video on youtube by bc racing, he loosened the spring all the way, then tightened it by hand until he couldnt anymore, then he measured 4mm and tightened to that.

I really do appreciate your help, thank you.

I recently brought BC Racing coilovers for my GTT.

I have installed them and set the spring preload to 4mm.

I have set the damper 6F 4R.

What spring rates did you get them in? The adjustable damping setting can only do so much.

IMHO the standard BC BR rates of 8kg front, 6kg rear are still pretty stiff for your average roads. I went softer, with 6kg front and 5kg rear, and I've been very happy with the ride and control.

There's some more discussion on the BC BR's on R34 GTT here.

that video is not for the type of coilovers you have for a R34 GTT.

Adjusting damping is dead simple on your coilovers, just follow the directions in the manual that came with the coilovers.

On this note, often its found that setting them to the softest setting on damping doesnt give the softest ride, a few clicks off totally soft in the back and a few more in the front is usually the best.

As for the spring preload, by all means go for the softest possible. To do this basically have the preload as wound out as far as possible and then adjust your ride height by screwing in the mounting cyclinder at the bottom of the coilover.

But beyond all this most of your ride comfort is going to be dictated by your spring rates that are in the coilovers you have bought. Standard BC's for skylines are 8kg front and 6kg rear, which is fairly firm and possibly a bit firm for people used to soft ride as well as driving in areas that have bumpy roads.

Iv got 8kg&6kg in my R33 with the damping up way more than that (recommended above) as well as upgraded swaybars, strut braces and nolothane bushes all around (+18's & low profile tyres). And all this isnt too stiff for me. But this is driven in perth where the roads are alot smoother, melbourne is much more bumpy in the metro area and would certainly be too stiff a car for those conditions...

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
×
×
  • Create New...