Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

4.0 LTR

starting to agree here, was down at power cruise today, i must of saw atleast 3 falcon turbo motors that had been transplanted into imports and a vl.. also with a massive garrett bolted on

My view is that for a 4WD to work properly it needs to make good torqe at very low to mid range revs and who cares about top end .

I also think twin cam heads do bugger all for most engines at very low revs , currently Nissan is having dramas with their V8 contender and not having a two valve head can be a disadvantage in a CR and rev limited engine . I doubt very much that a SOHC RB30 would give anything away to a twin cam one in the rev ranges that a diesel truck would use .

Something to look into is the RB34 that is now available , these are a stroked and slightly bored RB30 and if cubes are everything to you worth considering . You would have to check but I think the rebuilt short motor is something like 5-6G in your lap .

IMO the bigger the engine is the less boost it needs in a turbo app and you get a better more evenly shaped torque delivery curve or maybe plateau .

I would be wary of high rev performance because it can be a little peaky and even road car engine power curves in a significantly heavier truck .

Also high revs is where larger power numbers come from hence the diesels you speak of never have high Kw numbers - because they don't rev .

Anyway provided an RB30 mates to your gearbox and you don't have legal issues its a reasonable plan . Otherwise if your truck doesn't owe you much sell it and find an earlier RB equipt GQ or whatever and go from there .

Lastly , like most car lighter is always better but truck wise they seem to be getting bigger and heavier .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...