Jump to content
SAU Community

Recommended Posts

Hi All,

I need some help!

I'll try shorten the story..

Basically I was playing designated driver in December last year and was on the way home with my girlfriend. About 100meters from my house I got pulled over for an RBT. I had a few drinks during the night but I knew I was well under the limit. So I blow into the breathalyzer and somehow miraculously blew 0.128! I then get told I now have to go to east perth police station to conduct further tests.. My girlfriend was not impressed and obviously I'm shitting myself. Since we were so close to mine I left my car there and my girlfriend just walked to mine while I got a shameful ride to the police station.

Anyway they take me to East Perth station and tell me all the legal info & tell me how drinking driving is bad etc & i'll be arrested for being that far over the limit. So I do the 2nd blood alcohol test (15-20min after my first test) and what would you know I blow 0.000. So after having NFI what was going on it pretty much turns out the machine they was faulty and that was all for nothing.

While I was there they decided to wack me something so they give me a $100 fine because the standard holden fog lights on my car were left on (A genuine mistake as it was still switched to AUTO-ON from a storm we had 2 days before).

About a week after that I had to go overseas for christmas and forgot to pay the $100 fine and wasnt going to be back in perth in time to pay it. I wait for my renewal which I just got and now they just decided to add a demerit point to the infrindgement notice and also charge me the standard late fee!

I called up the infrindgement management number and get some old lady who wouldnt allow me to get a word in for my reasoning & told me its too bad and you need to pay it. I tried calling back to get someone who would be reasonable and listen to my situation but she was the only one who I could get in contact with regarding this. It clearly states on the infrindgement notice that no demerit points were inccured for this.

So after doing absolutely nothing wrong, I got dragged through all of that and get wacked with $113 fine & a demerit point that I shouldnt have. I might add I was very curtious through the whole thing..

Can anyone assist or tell me what are my options? Do I really have to take this to court? I'd prefer not to..

Thanks in advance!

Brendan

Link to comment
https://www.sau.com.au/forums/topic/419547-incorrect-infrindgement-advice/
Share on other sites

Bit odd that you got a demerit point, and unreasonable too I think. The extra $13 I can understand but I would query the demerit point further. Perhaps go down there in person or call again and hope you don't get the same old biddy.

But then again I have a friend who had a written letter from the bureau of meteorology saying that fog existed in the area and time she was booked for having fog lights on, and they still wouldn't budge on it, WA pol are the higher authority on weather..

Op there might be nothing you can do, police usually don't put how many demerit points you get because that's what usually annoys people. There's no requirement for them to inform you as it is the department of transport that handles the demerit points not the police. Out of courtesy they should fill in the box on the infringment.

Nick, you could contest it if you think your gf was justified but it's time consuming and costly...and the police know it.

I've contested drink driving matters and won, the machines aren't accurate all the time despite what the police have you believe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...