Jump to content
SAU Community

Recommended Posts

Hi All,

I need some help!

I'll try shorten the story..

Basically I was playing designated driver in December last year and was on the way home with my girlfriend. About 100meters from my house I got pulled over for an RBT. I had a few drinks during the night but I knew I was well under the limit. So I blow into the breathalyzer and somehow miraculously blew 0.128! I then get told I now have to go to east perth police station to conduct further tests.. My girlfriend was not impressed and obviously I'm shitting myself. Since we were so close to mine I left my car there and my girlfriend just walked to mine while I got a shameful ride to the police station.

Anyway they take me to East Perth station and tell me all the legal info & tell me how drinking driving is bad etc & i'll be arrested for being that far over the limit. So I do the 2nd blood alcohol test (15-20min after my first test) and what would you know I blow 0.000. So after having NFI what was going on it pretty much turns out the machine they was faulty and that was all for nothing.

While I was there they decided to wack me something so they give me a $100 fine because the standard holden fog lights on my car were left on (A genuine mistake as it was still switched to AUTO-ON from a storm we had 2 days before).

About a week after that I had to go overseas for christmas and forgot to pay the $100 fine and wasnt going to be back in perth in time to pay it. I wait for my renewal which I just got and now they just decided to add a demerit point to the infrindgement notice and also charge me the standard late fee!

I called up the infrindgement management number and get some old lady who wouldnt allow me to get a word in for my reasoning & told me its too bad and you need to pay it. I tried calling back to get someone who would be reasonable and listen to my situation but she was the only one who I could get in contact with regarding this. It clearly states on the infrindgement notice that no demerit points were inccured for this.

So after doing absolutely nothing wrong, I got dragged through all of that and get wacked with $113 fine & a demerit point that I shouldnt have. I might add I was very curtious through the whole thing..

Can anyone assist or tell me what are my options? Do I really have to take this to court? I'd prefer not to..

Thanks in advance!

Brendan

Link to comment
https://www.sau.com.au/forums/topic/419547-incorrect-infrindgement-advice/
Share on other sites

Bit odd that you got a demerit point, and unreasonable too I think. The extra $13 I can understand but I would query the demerit point further. Perhaps go down there in person or call again and hope you don't get the same old biddy.

But then again I have a friend who had a written letter from the bureau of meteorology saying that fog existed in the area and time she was booked for having fog lights on, and they still wouldn't budge on it, WA pol are the higher authority on weather..

Op there might be nothing you can do, police usually don't put how many demerit points you get because that's what usually annoys people. There's no requirement for them to inform you as it is the department of transport that handles the demerit points not the police. Out of courtesy they should fill in the box on the infringment.

Nick, you could contest it if you think your gf was justified but it's time consuming and costly...and the police know it.

I've contested drink driving matters and won, the machines aren't accurate all the time despite what the police have you believe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...