Jump to content
SAU Community

Recommended Posts

Hi guys,

The time has come to sell my V35. I'm willing to swap for a Mitsubishi Evolution 7, 8, or 9 or Subaru 06+ WRX STI plus cash adjustment your way if required.

Location: Cabramatta, NSW

Contact: Terry 0432 710 083 or email [email protected]

Price: $22,500 (recently dropped due to the 2 issues below)

Condition: In excellent condition, paint is excellent and shiny with no fading as per photos. Mechanically A1 as my father is a mechanic, so it has been serviced and well taken care of. 80,000km servicing has just been completed & battery replaced. Rego has just been renewed in January so it has 1 full year of rego.

First up, here are 2 issues with the car:

* The driver side door lock doesn't lock when using the remote (but it does unlock using the remote) otherwise using the key manually to lock the door is fine. I suspect the one of the clips is loose or came off. Will need to get this inspected but I've dropped my asking price to take this into account.

* 2 slight tears (around 2-3cm) in the leather of the drivers seat thigh support lower bottom corner.

The V35 is manual 6 speed with the Premium pack (leather interior, auto climate, Bose Stereo etc).

Features/Mods:

* VOLK racing CE28 19" rims + tyres (costed $4,000)

* TEIN Electronic Dampening Control system installed with cabin controller

* TEIN Adjustable Sports Coilover suspension (both TEIN components costed around $4,000)

* Heavy duty performance sports clutch

* Nissan optional front lip

* Nissan rear spoiler

* Nissan rear pods

* Side-skirts which match the lines of the car.

* Tinted windows

* Passenger side window motor unit replaced with new one (common issue with V35s which costs around $300 parts and labour to fix)

* Kakimoto Regu 06&R cat back exhaust system, not loud, legal decibels (costed $2,000)

* Performance panel air filter

* BOSE Surround Sound System with 8 speakers + Panasonic subwoofer and amplifier.

* JVC Touch Screen 7" DVD sound system unit that plays DIVX movies (costed $1,500 with reverse camera and iPod aux cable)

* Panasonic discreet Reversing parking camera

* Play iphone/ipod/non iPod Music Players via Aux-in cable installed

* Genuine OEM HID Headlights

* Climate Control

* Floor Mats (Factory, Skyline Logo)

* Infiniti badging (badges professionally removed from the boot for a clean look, will hand these to the new owner)

* Volk Racing wheel centre caps have been removed (will hand these to the new owner)

* Full security system installed (will give details to buyer)

* Headlights and grill have been professionally converted to black housing, giving the car a more sporty/unique look.

51909kg_20.jpeg

2220m92_20.jpeg

64853eb_20.jpeg

9683kl0_20.jpeg

3896h0n_20.jpeg

Thanks for looking guys!

Edited by sky76

Bump.

Can do lower $19,500 if VR rims substituted for 350z track rims, and dvd play, aux, reverse camera replaced for Pioneer HU and without rear pods and front lip. Price is negotiable as I see a car I want to buy.

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Bump. Price drop to $18,400 and will throw in DVD player, reverse camera, front lip, rear pods etc. Car is clean and will not disappoint.

Edited by sky76
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...