Jump to content
SAU Community

Recommended Posts

Hi all,

Got my engine rebuilt forged internals etc standard head just with 256 cams

Cranked the engine to build oil pressure, cranked it for like 5secs got 80psi pressure, started the car up and straight away lifters started tapping off its head,

Before anyone says take it to engine builder, I will on Monday when he open but been weekend Ill like to try work out what's wrong with it,

Nitto oil pump, still running VCt, blocked middle, 1.5m rear restritors,

Only thing I'm thinking is engine builder didnt do cleanances right? But I highly doubt it,

Bad lifters? How can I tell?

Link to comment
https://www.sau.com.au/forums/topic/419630-urgent-help-needed/
Share on other sites

Hydraulic lifters sorry,

Thought that as well, we had it at normal temps, (half way) took it just for short drive under 3000rpms and still ticking,

It seems to rev slow like it revs and the come down revs is slightly sorry

I was so nervous to start it as I have had so many issues in regards to work that was done on it, I didn't wanna start it... But just from

How loud they are and all the time doing it, I didn't wanna risk driving it and causing more damage, but yes they have been out of the motor for about 7months dry,

If its a fresh build you shouldn't be idling it or taking it on a light/brief drive.

You should be seating the rings or you'll stuff the build entirely. Tow it to the builder/dyno Monday and don't keep starting it now. All you should do on a fresh build is let it run for a couple mins just so you find any potential water/oil/air leaks etc.

yeah fair things i wanna check like cam cover just to make sure its not hitting it was late yesterday arvo 5pm and once i heard the noise i didnt want anything to do with it for the day was a let down she packed up closed the shop lol

Was the previous engine blow up a spun bearing by any chance??

It's so common this happens when a small bearing particle blocks the head oil feed from the previous blow up and you end up with stuff all oil to the head.

It's bloody hard to have the galleries cleaned out perfectly unless the original restrictors are removed.

A lot of engines I've seen built by various Motorsport teams like the supercars have external feeds to the cylinder head with inline filters to prevent this happening.

Hole bottom end was destroyed in the old motor, started again with block and crank, only think that didnt change was the head, but engine builder knew what happen with old motor and I told him to wash the head and he said he would do that,

Only thing that was used from the spun bearing motor was the head, lifters and cams? Could these of been f**ked from the old motor? I asked the engine builder to check everything to make sure it was all good to go back in

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...