Jump to content
SAU Community

Recommended Posts

Hey guys,

Unfortunately, last night I hit a gutter in the wet, and my front left wheel has seen better days. :Oops: It looks as though the suspension is all bent and I couldnt even drive it home as the wheel is unsiure which way it should be pointing :ghost: While I am upset and the like, life has to go on and now I need to get it fixed.

I'm sure i'm not the only person who has ever lost to the curb, and I was wondering just how much this is going to cost me to get fixed. I'm guessing I need my front left suspension rebuilt, possibly the steering arm is bent too. (can't tell at this stage).

The only positive side out of it is that I didn't sustain any panel damage as I wasn't travelling particularly fast, just a dud roundabout, wet road, little bit of stupidity mixed in for an expoensive ****tail of lesson learnt.

Any suggestions would be appreciated!

Thanks.

P.s. anyone got a stocker rim going cheap!?

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/
Share on other sites

Ahhh the dreaded gutter.

Almost EVERYONE runs their skyline into a gutter of sum sort during their life.

I did :D

Mine doesnt sound as back as yours is tho. How hard did you hit it?

Mine was expensive tho because at the time my front bar was really low, so ofcourse the entire front bar was ripped off which in turn cracked my headlights and moved my two front quarter panels.

I didnt do any suspension damage thanks to my hard teins :P

All up mine was about $2k to fix, but this included some other things like a full buff and polish of the car, new front bar.. etc

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-859671
Share on other sites

yea i was thinking around a grand aswell... i have no idea how i didnt rip the front bar off/smash side skirts etc, but somehow, its just the front left completely farked. :D By the sounds of it, im in good company though. i was expecting to be mocked and berated :P but then i realised it was a skyline site hehe

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-859691
Share on other sites

i smacked into the curb in the wet about 3-4 weeks back too. poped my left tyre so ended up gettin some cheap rims to replace the stockies. got a wheel alighnment to straighten the steering wheel but now it drives worse then before the allignment having a mind of its own when i decide to boost and change lanes. visual inspection shows nothing bent but i aint no expert......can anyone recomend a good suspension place in melb??

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-860076
Share on other sites

depending on what is bent, if you know the right places to look it won't cost too much.

control arm- $195

sway bar link - $30

radius rod - $95

radius rod mount - $50

strut + spring - $150

steering rack end - $110

r33 standard rim - $80

so for parts you will be looking at $700. if you can install all the stuff your self (isnt that hard!) it should be a cheap fix!

Link to comment
https://www.sau.com.au/forums/topic/41990-ouch/#findComment-860256
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...