Jump to content
SAU Community

Recommended Posts

Hi guys, selling my fully built nitto 2.7 ltr short block out of my 33 GTR. Selling due to gettting another EPA and putting the car back to standard and selling it as im over getting hassled.

Pretty much just selling the block and internals.

It will not come with, oil pump, water pump, harmonic balancer, sump or top half of the motor.

It has the works

2.7 nittto stroker kit

JE pistons 87mm

I-Beam rods

ACL race Bearings

L19 Head Studs

Block has been sleeved

Machined

Preped

Acid dipped

Blue printed

Has nothing wrong with it what so ever. Can be inspected. It will be out with no head or sump on it.

Built to handle 1400HP and rated to rev to 12,000rpm!

Was making 516AWKW with a T51r KAI on E85 with 26 psi and at 8250RPM

Was never pushed to its full potential as was only a street car

Photo's will be updated asap or i can sms them to you

Asking $10,000

Pm me or contact me on 0423 756 123 Cheers, Christian

  • Like 1

Also thought id add the motor has done about 6,000ks which was all on the street. Didnt even get to take it down the 1/4 mile. Oil was changed every 2,000ks. Was very merticulously looked after.

Poor bastard. I know how you feel about being hassled.....and about spending endlessly on them....its an addiction that takes you over...

ps. Anth he's still got heaps to worry about besides the high mount and air filter for an EPA!

Very bad addiction lol im at that house buying stage too so its probly a good thing it goes because ill never stop spending cash on it otherwise. Its soo sad to get rid of it. Victoria is shit n not worth the hassel anymore. Just been very unlucky with cops :(

Last price drop then its going on ebay. Need the cash, wont go any less or i may aswel keep it. Cost alot to do. Ready to drop in. $8000 for a sleeved and fully built nitto 2.7 bottom end!

Edited by I LOVE GATE
  • 2 weeks later...
  • 1 month later...

G'day all...

I've waited some time for advice from admin before I posted the result of this transaction more or less because I feel like a fool, but nothing has come therefore I have duty of care to warn other forum users about Christian aka I LOVE GATE, The bottom end turned up unsealed and full of dust, the block was missing the majority of the head studs, the block is cracked in at least 4 places (stopped counting) all the pistons have metal impregnated in the skirts and #6 has a section which has melted, all the bearings have metal impregnated, 3 broken oil squirters, the crank is 1 size under on the big ends and the mains are 1/2 size under, the rods have massive id pin punches, that's along way short of the description at the top of this thread, Christian has refused to accept a return, a number of businesses have lied during my investigations,

I cant be bothered adding any more....

Glen...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...