Jump to content
SAU Community

Recommended Posts

Over the last couple of years there has been talk of introducing a class within the MS Championship that caters for those nutters wanting to use a slick type tyre.

This includes, but not limited to:

Hoosier

Hankook

Dunlop

Avon

Pirelli

Advan

Bridgestone

It seems this year there maybe enough nutters to actually run this class and provide trophies at the end of the year.

So if we can get a consistent 2 cars on slicks turning up to each round and at least 4 different cars for the year after Haunted HIlls, then the class will be included in the end of year awards. If the numbers are not there, we can still acknowledge you, but you won't get an award.

Please bare in mind that slick type tyre use it up to the discretion of the club running the track day and the use of said tyre is generally dependant on weather conditions. Further more, to be included within the SAU MS Championship on slicks the car much as a minimum have a 6 point CAMS compliant ROPS.

Register your interest here.

Paul has already set a 1.39.x at PI on slicks in the first round of the year.

Bring it on.

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/
Share on other sites

Ill be in if there is enough interested parties. Slicks are fantastic compared to r specs, everything is better whilst driving on them except in the rain. It is the best bang for buck mod you can ever do, and you can get heaps more track days out of a set compared to your r specs so your saving $$$.

How bout spicing things up a little also, with fastest timed lap winner at each track at the end of the year??

On another note, John can you get bigger trophies for next years presentation as we could hardly see them...just saying cause I didn't get one.

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/#findComment-6760489
Share on other sites

They have been about a meter high in previous years. I'm running out of space to store em, so smaller ones were a must :P

There is an idea for a perpetual honours board for the fastest time for each track for each year.

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/#findComment-6760549
Share on other sites

I'm keen to have a go on slicks and move on from std awd so that's 2. Just wondering where does the 6 pt RPS requirement come from? not really an option for a road driven car. maybe 4 pt okay?

Class needs a better name. maybe "unlimited"

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/#findComment-6760594
Share on other sites

It's a general understanding that clubs have, some enforce, some don't. In the past WRX have been one that does enforce it.

Either way, commitee has previous agreed that running a slick increaces corner speed a loading and can therefor increase the impact of a mistake.

It maybe a possibility for a 4pt with side intrusion, but that will need to be discussed.

Essentially we need to promote a high level of safety. WTAC mandates 6pt for Open Class and up.

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/#findComment-6760637
Share on other sites

Mr datto nailed it... "Unlimited" class is awesome. Have done some piarc days and 4 point cages are allowed with slicks and no side intrusion as the doors already come with this in place as a registered vehicle. Not 100% on the written regards to cage but seen cars running this set up and pass scrutineering every time.

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/#findComment-6760815
Share on other sites

  • 1 month later...

They have been about a meter high in previous years. I'm running out of space to store em, so smaller ones were a must :P

2nd that.

Slick class is a great idea. Interesting to see how many take it up. I might later in the year but still have sets of AO's from last year WTAC to use up first.

Link to comment
https://www.sau.com.au/forums/topic/420333-slicks-class/#findComment-6795821
Share on other sites

  • 1 month later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...