Jump to content
SAU Community

Recommended Posts

I'm looking at putting an aftermarket rear diff into my car and throwing the standard "A-LSD" in the bin. From what I can gather, I need all the Non V spec gear to make this work but what EXACTLY do I need? Does anyone have a part listing so I can go and get it?

I assume all aftermarket diffs require the same thing wheather it be a Nismo, Tomei, Quiafe.

yeah it ends up being quite an expensive exercise..

you need the non V-spec diff housing and shafts,

then obviously your aftermarket centre of choice.. I went the Nismo GT-Pro 1.5, not as street friendly as the A-LSD, but you know its locked when you need it.

nothing else special required..

Thanks Tricstar. That's exactly the info I need. How do you find the Nismo? I was looking at putting a Quaife in mine which have only just been released. I have one in the front and love it to bits.

Did you get your non v spec stuff second hand? If so, what sort of coin did it set you back?

Michael: Were you still interested in a Quaife rear?

Thanks Tricstar. That's exactly the info I need. How do you find the Nismo? I was looking at putting a Quaife in mine which have only just been released. I have one in the front and love it to bits.

Did you get your non v spec stuff second hand? If so, what sort of coin did it set you back?

Michael: Were you still interested in a Quaife rear?

Yes, have it sorted. Send me an email if you want to discuss.

Bare in mind I'm in Perth, so everything is more $$

Got the diff and shafts from a Jap importer/wrecker for $850 o-:

nismo GT-Pro $1400

diff set-up etc $450

replace boots on shafts $150

also did wheel bearings $800

and did the install myself $0

like ever job, theres always things you don't think of..

I do find the GT-Pro quite aggressive for the street, skips and clunks when cornering slowly. If the Quaife rears are like their fronts, I think it could be a good option, I know a couple of guys over here using quaife fronts and they seem pretty good the way they operate.

Yeah fair enough

I got a mate to price up shafts and housing from his mate in Japan. Came to just under $1000, which seems pretty good considering what you paid.

Yeah, I'm very impressed with my Quaife front. Just plant your foot and point, it's rediculous!!! Definitely makes you realise how bad the standard setup is!

Non v-spec diffs and shaft come up in the F/S fairly regularly but go pretty quick, but generally only around the $600 mark.

yeah I got a OS Giken 2-way up front, wouldn't know it's there until your hard at it, then its point and hang the f##k on..behind a 2.8L also ;)

Isn't it funny. The V spec was the more expensive car but in the end you rip out everything that made it a V spec to begin with!

Argh... Quaife or Nismo 1.5 way. :\

If it were me, I would go Quaife for a streeter in an instant. Probably for a track car as well unless it was a very serious track car.

I put an S15 helical into my R32 and it is much much nicer than the old VLSD. You'd not know it was there except that drive out of corners is so trouble free and positive. The only hassle with them is they are effectively open with one wheel in the air. This is only a problem on the occasional driveway entry and so on, and also on a track where you may have stiff enough suspension to cock a wheel, or if you abuse the kerbs.

Ahhh... now I know what you wanted to call me about :merli: (below might answer it, but call me anyway lover :wub:)

As Richard said above.
Although you can use the V-Spec shafts - it's the joiner/coupler thing (I dunno the technical name) that is actually different length so if you can find JUST the diff it can work out a few hundred cheaper, but most people won't sell without so its a moot point.

On the lowest lock setting for the Nismo, as recommended by RP, mine would clunk a little but if I wanted I could've just added some Penrite friction modifier and get rid of it. I didn't care though as it was not really a problem for me.

I loved Nismo GT Pro front/rear combo and would do it again if i purchased another GTR (right after taking off turbos), lift-off oversteer and 4WD powerslides FTW. Always locked when it needed to be so it was 100% predictable every time. It was like having a RWD and 4WD car rolled into one, hard to describe.


Only "issue" was trading 4WD hellis for 4WD powerslides. Car refused to helli with Nismo front/rear & the RP spec Tiens no matter what I tried it just hooked up, so a good "issue" to have :)

  • 1 month later...

not much really, just the line between pump and diff. and block the outlet with a bolt.

its the same pump and computer that runs the ATTESSA so all must stay.

Quaife or Nismo ?

Ah sweet!

GT PRO mate. :D

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...