Jump to content
SAU Community

Recommended Posts

hey guys


selling off my project car r33 gtr i only really just bought it but have moved onto an r35 haha.. cant afford both, especially with r35 parts being as expensive as they are.


ALL PARTS LOCATED IN MACKAY NTH QLD, POSTAGE CAN BE ARRANGED


I CAN ALSO POSSIBLY TRANSPORT THE SHELL TO BRISBANE OR NEAR THERE PROVIDED I HAVEN'T SOLD THE WHEELS OR ANYTHING ELSE TO MAKE IT DEMOBILISED!! WILL ALSO NEED A MONTHS NOTICE AS ITS A 1000KM DRIVE AND NEED TO ORGANISE A TRAILER OFF MY MATE..


R33 Gtr mnp shell it is complied and DID have rego a couple years ago (nur33's old shell) - $1500


  • Front windscreen cracked
  • Stripped interior, not one bit of wiring harness front to rear
  • Front guards modified as per picture
  • Custom dash reo bar made
  • Custom alloy dash made
  • Sound deadening partially removed - just the stuff i could get with dry ice.. Some still baked on like around the gbox tunnel
  • Front radiator support cut out - was planning on welding a couple tabs to it then bolting it back on via the tabs
  • Lower front chassis brace cut out and replaced with a piece of tube to give the radiator more room and be able to have the intercoler sit upside down and have its inlet and outlet very close to the intake mani and turbo for short piping.
  • all fuel and brake lines have been removed
  • aerocatch bonnet pins
  • led taillights
  • will throw in the whole car loom and all ecus that i have.. loom is cut in a few spots and one ecu is damaged.
  • NO DIFF!!


additional parts to suit.. if you buy the shell the below parts will come at a discount depending on what it is you want.



  • r33 gtr BC External Reservior coils, as new only fitted and moved 50metres - $1350
  • r33 gtr black oem front bar, good condition paint is scratched a bit - $500
  • r33 gtr/gtst greddy front strut brace - $125
  • r33 gtr carbon fibre grill with no symbol just mesh - $100
  • r33 gtr rear wing, carbon end caps - $350
  • r33 gtr front lights very good condition - $350
  • r33 gtr/gtst cusco hicas lockout bars very good condition - $250
  • r33 gtr cusco front swaybar - $250
  • r33 gtr moonface racing castor arms - $200
  • r33 gtr passenger seat, good condition - $250
  • r33 gtr front drive shafts - $400
  • r33 gtr rear driveshafts - $500
  • r33 gtr front propshaft - $150
  • r33 gtr main propshaft - $300
  • r33 gtr rear strut tower/boot bracing, not the bar that goes from tower to tower but the bracing that bolts to the strut tower and boot floor - $150
  • r33 gtr bonnet, mnp with genuine uras bonnet vent - $450
  • r33 gtr interior panels, have a whole bunch of them, pretty much only threw out everything in the back half of the car and the dash - not sure what condition it is all in these days so if you want something i will have a look and see if its there then get back to you with a price.

Aftermarket Stuff


  • GTR Trust Drag intercooler 600x300x150mm, VGC, part of the end tanks chopped off for the different orientation i was planning while running it upside down - $1900
  • Stack 8130 dash - excellent condition has all loom, oil pressure and one temp sensor.. needs one more temp sensor to complete it - $1450
  • Full Set r34 gtr standard brakes with slotted front and rear rotors, rotors have been painted to keep rust off - $2000
  • AME TM-02 wheels, 18x10+15 all corners on 1000km old achillies 123s semis 265x35x18 - all very good condition no gutter rash - $2300
  • rochester 14mm 1200cc injectors x 4, never been used only fitted - $400
  • buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450
  • sr20vet mazworx lhd or RHD without brake booster intake manifold, no fuel rail as new condition just needs a throttle cable bracket welded on - $500
  • s13 whiteline front swaybar good condition - $125
  • S14/15 K.L.S camber arms - $85
  • 2jz exhaust manifold 3d flange ready to make a manifold - $100



thats it for now..


please contact me (spencer) on 0413347774 or via pm

as requested, a picture of the bonnet. only one i have thats half decent.. i can get some better ones on the dslr tomorrow if you want? bit dark atm

also has aerocatch bonnet pins fitted now instead of the ones pictured and forgot to mention the n1 lip

DSC_0001-1.jpg

Hey

So far the rear driveshafts are gone and front bar, had intrest in the suspension and most likely sold the brake master cylinder.. Other than that it is still how it looks in that picture minus the autoselect lip..

Send me a pm and we can work a price out depending on what you want to come with it..

  • 2 weeks later...
  • 3 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...