Jump to content
SAU Community

Recommended Posts

Just started looking at a r34 auto to get built from mz autos. Should hold the power abut better than the vl box in there now.

Re tune booked in from status for this Friday. Should be interesting when done.

4N71B trans went bang ? Try to get a nissan Y31/32/33 trans if you can, the Re series of autos out of these cars are near on bullet proof (when kitted out)and mv trans in s.a have done a few

Bell housing from rb bolts onto vg easily

Good that you are keeping an older nissan alive

There doesnt seem to be much appreciation for these classics

4N71B trans went bang ? Try to get a nissan Y31/32/33 trans if you can, the Re series of autos out of these cars are near on bullet proof (when kitted out)and mv trans in s.a have done a few

Bell housing from rb bolts onto vg easily

Good that you are keeping an older nissan alive

There doesnt seem to be much appreciation for these classics

Thanks I got a trans from a r34 going to mv today for a full build. Should hold upto the abuse well I think. At least I can get a better converter this time. Lol
  • 1 month later...
  • 2 weeks later...

Had a slight issue with the new trans. The pump bush seized onto the converter snout in 5 mins of driving. Box out and thanks to mv autos it's fixed and due back to me this week for install and fun over the weekend

Thanks to mv autos box is back in and works well. Loves to skid now. I have found boost control issues now. Boost climbs well over 25psi with wheel spin but steady with none. I guess it's time to go external gate now

  • 2 weeks later...

How's the auto holding up. How much better is it then the auto you had.

What gears have you got in the diff. Does it driver better then before (cruising / power runs)

I like this box a lot more than the other one. It shifts a lot faster. Second to third is instant before had a delay.

I have 3.7 diff gears. I would like 4.11's but they are very hard to find.

The box is very smooth when shifting on the converter and very hard when under power. The lockup clutch keeps the temps down on the highway too

Best money spent on the car so far

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...