Jump to content
SAU Community

Recommended Posts

Nah, you wont fit 10s under a stock 32 gts-t rear end.

on stock wheels you can fit 225 tyres without guard rolling.

You can definately get 9 inch wheels with 235, maybe 245 tyres if you lip the rear guard.

i have 265 Falkens on 9inch rims with untouched guards.

thing is though that these tyres are much narrower than 265 Bridgestones that i compared them to and only a little wider than 235 Bridgestones.

i spoke to a guy at a tyre place and he said that there are differences between brands and that the cheaper tyres are usually wider and the more expensive ones are narrower.

i dont buy that though cause i always thought that Falkens are generally cheap. and they were compared to bridgestone S02s.

so dont always trust the numbers

i have 265 Falkens on 9inch rims with untouched guards.

g'z

i got 9.5 wide wheels. had 275 rubber n it was impossible 4 me, cant remember the brand of rubber but i know it was a semi slik that was bald i just threw them out n put sum nice 235 dunlop rubber, much cheaper.

I got 18 x 8.5 on the fronts and 18 x 9.5 inch on the rears. Front tyres are 235 40 18, and rears are 245 40 18. (could go 235 or 255)

I tried the 9.5's on the rear and it seemed to have the same clearance as the 225 50 16

Hopefully all fits well....:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...