Jump to content
SAU Community

Recommended Posts

hello to all,
i have made the decision to start stripping my stagea going into mid April,
It is a 2001 S2 RS4S

This is an entire car that I have as my daily and I will be stripping completely, unless somebody is interested in buying it for $11k.

Details as follow:

Manual NEO rb25det @93k km.

everything from centre console to engine to looms, coilovers, exhaust, power fc, downpipe etc etc is available.

the aftermarket goodies i have are:
-Coilovers, custom made from bilstein and cusco. used for about 4000km 24x damper adjustable, Front 13kg/mm Rear 9kg/mm

-HKS high power silent exhaust (SS), comes with highflow cat, and even a straight through mid pipe, which replaces the Cat, and muffler for those who like the sound, and the flames...

-3" split dump

-r34 power fc

-r34gtt rims with 30mm spacers to fit the rear wheels

- has reco, and newly powedercoated rear subframe. (replaced due to the pothole saga for those who remember)

Misc:

-diff still locks up really well, no squeaks or weird noises while driving (all around the car)

-has front dayz bar in pearl white, has marks, rear is a dolphin bar.

-reco front drive shafts, new boots and joints

The bad:

Front quater panels have 2 dings in them from some dipshits opening their doors into them, the roof has some hail damage.

driver power window motor has given up.

the car has been serviced every 5000km with full synthetic oil, 5w 40 nulon oil. the car works 100% and i have looked after it performance wise like a god, has never and will never miss a beat

like every japanese stagea, it has some rust here and there.

I will upload pictures tomorrow

if you guys are interested in either the whole car or parts let me know, either pm me, call me, email me or reply on here.

Email: [email protected]

Ph: 0406168123

Remember: MID APRIL is stripping season, not before, as I need it to get me to work.


Regards

Jean

Link to comment
https://www.sau.com.au/forums/topic/421169-stripping-stagea-s2-rs4s/
Share on other sites

dibs front bar pending pics and price, possibly power fc (probably still that GTR one if you have it too...) also guessing rest of the car is white? condition of bonnet?

  • 2 weeks later...

ok everyone, this is a rough start, will list whatever else i can think of/ people ask for.

Dash: $150
ClusterSpeedo: $250
Vents: $100 for all
3 middle gauges: $100
air controller unit: $100
Steering wheel: $25
Centre console: i will put on ebay so the highest bidder can take it as there are too many people interested. (ashtray to armrest)
Pedal setup: $150

Engine, loom, ecu, sensors and all pumps, sensors etc incl front diff: $2300 perfect for whole conversion
Gearbox with shifter and transfer case: $800
front shafts: $100 each
rear shafts: $150 each
rear diff (LSD): $300
rear subframe incl hicas, hubs, joints etc: $500 (acid dipped, and powdercoated in black. this is also the reaaaaaaally narrow subframe if you wish to put on the craziest offset)

front and rear brakes, with pads and disks: $200

Stock suspension: $100

Coilovers 24 damper adjustment, f13kg r9kg: $750
neo power fc with handcontroller: $900

Exhaust: Stock, HKS hipower silent with stainless cat, and a middle muffler replacement pipe and decat in one, and a 3" split downpipe: $1000 for all and everything

Body panels:
Bonnet: $100
Front doors: $150 each
rear doors: $150 each
rear glass around boot (with the inbuilt antenna): $150 each
boot: $130
I will take out all the locks from boot, ignition and doors and will put it up as a replacement kit for anyone interested
Spoiler (fibreglass): $80

FRONT DAYZ BAR: will also be listed on ebay for everybody to have a fair go at

side skirts: $150

Xenon front lights with ballasts: Both $400 would benefit from a nice polish
rear lights: $300 for everything, all 4 lights
side white blinkers: $50 pair
front blinkers: $80 pair
front high beams: $100 pair
Grill: $100
left and right guards with some scratches and a dent or 2: $40 each

roof racks: $300

r34 wheels: 4x with tyres and 2x in gun metal grey with no tyres $400


Everything else, just ask me as i have no clue what other main parts i may have missed

Edited by Bronx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...