Jump to content
SAU Community

Recommended Posts

hello. I write to you from Russia.

one I have skyline r33 rb25det 1995.

specs:

piston gt-r

ear ACL

laying stock

greddy intercooler

pump n1

fuel pump nismo

720cc injectors

stock intake manifold

turbine kinugawa td06-25g

processor apex power fc

maf z32

full exhaust

and much more on the little things.

please tell me?

The pressure is 15 psi, how much can you max pressure to do? without damage to the motor.

thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/421310-need-advice-on-pressure/
Share on other sites

Do you have a tunable computer ecu? If so you need to find a dyno tuner that can increase the boost while monitoring the afr to ensure no damage to the engine. If not its very hard to say but for short periods 18 psi should be ok but hopefully someone else will have more info for you.

Scott

Thank you very much for your answers.

I have a custom computer apexi power fc.

with dyno in our town a big problem, we just do not have it.

machine set up on the go, riding on the road

mixture of a / f control aem uego, as well as the whole range of sensors is defi.

turns out I have understood correctly, with the right settings, I can not do damage to the engine 18-20 psi???

Thank you very much for your advice, I'll build up to 18psi.



Please tell me what you think gash stock injectors?

Here in Russia, many do receive from their 720cc


here is the link

Thank you very much for your advice, I'll build up to 18psi.
Please tell me what you think gash stock injectors?
Here in Russia, many do receive from their 720cc
here is the link

not real good but is a cheap and popular highflow route, fine for power but idle and fuel consumption is generally compromised.

these are available on ebay as various brands.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...