Jump to content
SAU Community

Recommended Posts

hi guys got few things for sale

3inch cat back exhaust with nusmo cannon, has centre muffler, nice note no drone

$300

3inch racepace decat

$100

r34 gtr suspension with lowered king springs (sits nice 25mm lower)

$150

standard r34 gtr vspec ball bearing turbos , no shaft play, with actuators,only boosted to 12pound 60,000km

$300

eoi volk te37 sl 18x10.5 +15 with 90% kuhmo ku31 tyres, perfect condition besides a very light graze on outside of 1 rim, quoted $50 to repair

r34 gtr sat nav,climate control,tape deck,cd stacker setup

$50

eoi volk te37 sl 18x10.5 +15 with 90% kuhmo ku31 tyres, perfect condition besides a very light graze on outside of 1 rim, quoted $50 to repair

im wanting 19inch rims so even swaps?

located melbourne

Pm me cheers

Link to comment
https://www.sau.com.au/forums/topic/421316-r34-gtr-parts-eoi-te37sl/
Share on other sites

well i baught them from OTR for 3600 and 1200 on tyres, done about 5000km, if i could get 3600 id be happy, its like your getting a free set of tyres

with the 19s i might be interested but as theyd need repair id want cash my way

pm me your number and il send photos

Anthony,

1) runkos is after a stock cat back exhaust for his R34 GT-R. Shouldn't be any complaint against Nismo.

2) God_speed might swap his new 20" GT-Cs with the correct face for a R34 GT-R in exchange for the TE37 SLs

I think I've passed my memory test for now.

thanks terry will contact them tomorrow

p.s my mate posted a thread on another forum about under carriage been sprayed black by personal importer, you were 100% correct about acid rain, dodgy as!!

cheers once again

in 19s look good, have a look at HIRISK

il only do it if i dont loose too much money on it, car looks good how it is but i change my mind quicker than change underwear lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...