2Jz, 6Spd Getrag, Macpherson Converted R33 Drifter

[na beast]

Hey Homies!!

Sorry ive been so lazy over the last year and a bit,

alot of stuff came up and the project got pushed back as usual,

on the + side i done a nice big tour of Europe, got engaged & done another drifitng to Japan.

The car has come along way since last photos last yr and is only approx 10 weeks from being completed.

Over the next couple days ill slowly upload all the New photos.

Thanks Guys!!

[na beast]

1st time everything was bolted all together

I dont know if you've mounted an aftermarket seat in you 33 before but if you have you'll realize what an obscure angle the front of the seat kicks up and how high you are actually sitting, this is why i took the grinder to the factory floor mounts and fab'd up my own so my legs sit in a very comfortable postion

[na beast]

Subframe all braced and gusseted, solid bushes throughout and a fresh coat of paint. Has a kaaz 2 way i put in there only about 6 months before i took it off the road

[na beast]

New rear dual caliper PBM knuckles, stock brakes all freshened up as well as new bearings

[na beast]

This was the lock with the gk tech knuckles, currently no lock stops welded in. Was having lots of troubles going over centre on full lock, since then i have decided to change to PBM front knuckles due to a personal choice and the powersteering rack has been moved forward.

all tacked in

[na beast]

My brothers project also taking place

[Redline_GTR]

Wow coming along great James

[na beast]

Bonnet latches installed

Removable rad support

[na beast]

1st time its been on the ground in about 12months, pretty exicted

[na beast]

Fuel system finally complete!

[na beast]

Interior slowly coming along

[PranK]

Mother of mercy I weeped a little bit when I saw the strut mount. So beautiful!

Cracker of a thread, looking forward to updates.

[timmy_89]

Looking good!
Will the outside be the same colour as the inside?

[na beast]

Looking good!

Will the outside be the same colour as the inside?

Nah i have a differnt color for the outside, i sprayed the fender my new color for a sample which ill put up

[na beast]

Top half of the fender is the new color

[na beast]

Engine bay is coming along nicely, this is how it currently sits as im still waiting for my motor to be finished from sydney.

New switches for the Dash.

[na beast]

Motor almost complete, Just waiting for oil pump to rock up from the states and where good to go.

Hopefully my new engine loom from chasebays rocks up this week so i can start chipping away at the rest of the wiring this weekend and switches

[na beast]

So motor is back and finally all assembled and back in the bay

[na beast]

Out the shed to send off for the rest of the fab work. Ic piping, exhaust, tailshaft, oil/fuel lines in bay, brakes lines.

Crazy front wheel track.

[iruvyouskyrine]

Interesting that your sticking with a turbonetics. What's the equivalent garrett item?