Jump to content
SAU Community

Recommended Posts

Skipped gym tonight, too many little niggles and sore bits, ankle in particular, especially after pulling the box in the car yesterday.

Just went for a walk instead, will see how I feel Wednesday but may take a full week off as its been a while since I've done that and I promised myself I would to avoid injuries.

Good idea Dan, I'm doing the same due to lack of sleep over the last 7 days. I'm still doing cardio tomorrow, but am missing two weight sessions (which is 4 days off) will return to weights on Wednesday.

Hope you feel better soon.

Hammy is still twinging for no apparent reason, does it when I walk, does it when I sit, just random times also.

Have been stretching and manual manipulating my ankle recently as asked by the physio and getting out of the car this morning it twinged decently and I had trouble walking up the steps to work, not feeling too bad now but geezus for a second I thought something major had gone wrong. It still has a way to go.

I may take tonight off also and just see if I can get any improvement on this hammy.

Skipped Gym again last night and didn't walk this morning, Hammy still twinging when I got up so I'm going to see a Myo today if I can get in. AT least my forearms/wrists and my bad ankle are feeling better.

I may just gym Friday anyway as I can feel myself wasting away and getting weaker by the day, yes I know it all comes back, but it'll take 1-3 sessions to go back to where I was.

Taking time off hasn't helped the hammy so far anyway, maybe a little but not much.

Edited by ActionDan

Sounds like a good idea. I find more it difficult mentally to get back into it after a break. Hope you get your hammy sorted out today, good luck :)

Edited by L33SH

Mentally I'm a bit all over the shop at the moment with a lot of questions about why I'm doing this etc etc, but whenever I stop I always have that burn to start again, even if it's only been a week like it has been this time.

I've said before I might buy some new plates, to give me something to aim at, but I'm also thinking I might mix up the squat stuff and see if I can build reps at say 100kg to get a foundation in place as I'm such a shit squatter.

good stuff, I have found at times even with ningling issues, if I get in and just start lifting or whatever else they tend to go away.

might be the mma background in me where I was always injured but had to train or fight with them.

depends how bad it is, and obviously your ankle has to be taken into consideration

It was just good timing in a way, I needed a deload week, come Friday I'll have had 7 days off, (but have been working on the car...)

I'll get the rub today, lift tomorrow and see how I feel over the weekend on my 2 day break (though will be at the car again lol)

They only had a remedial masseuse there and from what I could tell she was fairly green.

Still, she worked on it and it wasn't twinging when I walked out. She thinks is just a strain between the hammy and the upper head of the calf muscle (gastroc).

She massaged it and "cupped" it and said get crazy with the foam roller and stretching as it was quite tight and fairly firm which is always what people say when I have an issue.

I might head back to Matt soon for a form check as my gammy leg still throws some things out and the left leg may be taking the brunt of the load.

Went for a walk last night and this morning, there's still a light twinge but I'm inclined to say it's slightly better, but not "sorted".

I'll gym tonight, maybe only 4 sets instead of 5 (I usually come back a touch lighter on my first session anyway for safety) and see how I pull up.

Was talking to a mate of mine last night who is training for BB comp and he's at the same point as me in terms of why am I doing this so it seems there's a bit of it going around at the moment.

if you have a hard table or something, sit on it with ur legs hanging over the side, put a cricket ball or a golf ball under your hammys and basically do the same movements as the foam roller.

hurts a lot more, but helps relieve some pressure.

Yeah I did that.

I've started stretching my calves more too to see if that helps release it as suggested by the masseuse.

I'm also thinking I might switch back to a 3x8 routine, still increasing weight each set though. As I think this might suit my goals a bit more, which is more about looks than it is about weight to be honest.

After thinking about what "I" wanted from Gym I've decided to go back to 3x8s due to increase sarcoplasmic hypertrophy. Which is just essentially being a bit bigger/more defined but not necessarily being as strong and I'm OK with that as I'm probs 60/40 looks/strength in my goals. This will also save me a few minutes in rest breaks and I'm looking to reduce the time invested.

So with that in mind I gym'd last night and knowing full well I'd be weaker from the weak off chose weights I thought I'd fail in the later parts of set 3 and I was right. Pulld up OK today, but during the sets I forgot how much harder the extra reps are when they are continuous. I also had a breif fiddle with incline bench, felt really alien and weak, ditched it but may try again.

So.

Squats

80.5 90.5 100 (5 reps)

Bench

93 101.5 106.5 (7 reps)

DL

88 97.5 104 (7 reps)

Rows

78 88 93 (6 reps and sloppy)

Chins

7.5 12.5 15 (6 reps)

Dips

15 20 25

So dips was the only thing I got fully through and only just :D

This week I'll stick to those numbers and get the full 3x8 out then after that I'll start increasing weights again and will treat it such that when I can get 6-7 reps on the final set I'll add again.

Hammy doesn't feel too bad today but I'm about to go turn some spanners so we'll see how it feels later.

Was good to do a session :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...