Jump to content
SAU Community

Recommended Posts

I've had dry needling twice and it helped.

I went to my physio on Friday (not the myo) and he agreed that it's nerve pain, likely from lower back impingement.

I'm back into the nerve glide movements and stretching.

Edited by ActionDan

Brief update, after a very busy weekend my leg nerve/hammy was really giving me grief last night, really twinging hard everytime I got up/moved around.

Had a really good stretch and did some nerve glide exercises (feet pointing and head tilting to move nerves through the sheath) which helped a biut but it's still unhappy today.

Pretty confident it's coming from my lower back too.

My guess is you have hurt your back (lower spine) or it may be piriformis sydrome, this can occur 'without' the knot in the muscle. The sciatic nerve is responsible for what you have either way and it's being messed with.

I'll keep working on it, you just keep sloggin away til you find the root cause then change whatever you need to to avoid it. We've all had enough injuries to know how this goes.

Just annoyed that there was no "clear" cause or instant where I can think of. May just be poor technique squatting or bad mechanics in my pelvis from bad rom in various joints.

surely you can get scans or whatever to find out 100%

i am all through pushing past a ningaling injury, but if that is not what it is then you need to sort it asap dude

I'll make that call soon.

It probably sounds worse than it is, it's a nerve pain in the lower hammy area, above the knee that comes and goes with movement.

Physio has just given me new exercises specifically for nerve issues, glides, leg raises, etc so we'll see if that helps or aggravates it.

I'm convinced my leg issue is actually a lower back issue, like right down low above my butt crack.

I've been paying close attention while doing the work the Physio asked for and I'm really noticing some tightness and discomfort in there.

IF I have no success there, I'll see a podiatrist and have a proper gait analysis done to check out my mechanics.

I've never had back or pelvis issues in my life until busting my leg.

But to be fair, I'd never done squats or DLs either, only ever running and lunges.

Back, no immediate relief.

She took xrays to examine and said I had a functional leg length difference (only notable when not standing/loaded up) which implies soft tissue discrepancies - no surprises there. Also my pelvis is tilted forward, putting pressure on the lower disc(s) which she feels may be impinging the nerve, she also showed me that the second lower disc when looking from the front is not sitting even, so there are other imbalances in my pelvis. Also noted that my bad foot wants to rotate outwards and roll inwards, which could be a cause or a symptom of pelvis issues.

She made some "adjustments" on some special contraption of a table but I didn't feel much going on. The table raises up in sections then she pushes down and the table drops down and resets.

Keep stretching, keep walking, jogging if I want and can tolerate, no weights for now (as in squats/DL), do light core work, planking etc.

Going back in a week to see if there's any difference, if not she concurred with my plan of attack of seeing a podiatrist next.

I don't follow the first part?

I've had a full week off gym as of today, done nothing since that last session.

I didn't make 8 last time so I'll see if I can at least get 8-9.

After that though?

I'm in two minds now, have lost a lot of momentum and interest in gym in general not being able to do squats/DLs and trying not to do anything that upsets my back/leg.

So I'll see how I go tonight with the bench, if I can get 8-9 continuous then good, but after that I might drop back to a weight where I can get out 3x8s and settle on that.

That said, if I was "going for it" tonight, regardless of if I do or don't make 8+ continuous reps, would the total reps normally go up?

That is, when you were doing it, did you just keep adding reps to the total until you started seeing improvements in the continuous phase or were you just adding more and more weight every time.

To keep it simple Dan. Pick what you 'want' to do for Bench for tonight. You might do what you used to do , you might try something else.. But, pick something you 'want'. You can challenge yourself if you 'want' or you can make it comfortable. You choose this time for yourself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
×
×
  • Create New...