Jump to content
SAU Community

Recommended Posts

Tablet/in my head.

I'm relaxing my approach a little as I've got enough size and weight, 6ft and 88kg is heavy set enough for me as I'm a fairly fine boned person (small wrists etc)

So I'm just playing with weights and exercises to see what feels good and allows slow progress, as in only getting 20 reps on a 24 rep scheme for bench means it's too heavy so I'll drop it back to where I can get say at least 22 and work from there.

With the legs just keeping them going while I sort out what's up with my back/leg.

Walking to try and burn some extra calories and trim up a little while the planking is to get some core strength back as no squatting means far less core recruitment than I needed previously and the Chiro recommended them.



try the app jefit

calculates volume and your 1rm based off previous and current lifts.

also lets you know how much weight at how many reps you need to bust out to increase volume or even your 1RM

its handy

Spent a bit over 2 hours on the back of a shovel, rake and pitch fork last night transplanting some good grass that was removed from the shed site into a patch that had bad grass.

My back, leg and neck are far from impressed. Forearms are also not pleased.

Will see how I feel later and make a call on gym tonight as I've got work to do on the car this weekend as well.

Didn't gym Friday, did a few warmup benches and my shoulders and forearms were not happy from the shoveling on Thursday. Mowed lawns instead.

Ended up having to do another hour and half of shovel and rake work yesterday and my back has been really unhappy about it. Like I've gone backwards a few weeks =\

I was going to work on the car today but my shed slab is down and apparently it's going to be hot today so I may have to stay here and keep it wet.

Bummers all round (except the shed slab that's a win).

Got some gym in last night, a good 40min session that had me puffing.

Dropped the bench weight and think I've found the right "starting" point.

managed 8/8/7 (just managed to get the 7th above the pins not a full lock out. This was at 105.

Did 10 squat reps with an empty bar trying different foot positions and width, with board, without. Notice that no matter what I do, my right knee always sits higher when I'm down in the hole, assuming pelvic tilt or lack of ankle rom stopped knee moving forward like it should.

Did 3 sets of those 10 reps, and after each set did 20 calf raises with my toes on a board to allow greater range and used some 3kg dumbdells.

Managed 8/8/7 on the 20kg weighted chins so almost ready to add a little bit.

Then did some single legged dumbell lunges but more like the drop portion only. So in the lunged position but just dropping and coming back up rather than stepping out into the lunge if that makes sense. I was doing 20 and alternating legs so 10 each side but I did 20 one one side then 20 on the other, and felt some good burn.

Managed all sets of 26.25kg weighted dips, not getting a huge tricep burn on this though which I read is about torso angle. I want the tricep load as it makes up so much of your arm size and mine aren't very big.

After that did some reverse pretend deads, just the motion with some 3kg dumbells.

After that managed a 1m 50sec front plank and called it a day.

Back is feeling a little better today for it.

lol, yeah pound for pound you'd be stronger than me in many exercises Leesh, I've lost so much strength in so many areas, but things could be worse.

I used to plank for much longer too, and do invisible chair wall holds, sit against the wall like in a chair but with no chair, hold for as long as you can etc, and kill it (when I was snow boarding) but I've lost a ton of core and leg strength through this leg break period.

No biggy though, I still look ok enough and could be weaker I'm sure :)

I'll get there. wherever "there" is.

My abs are not anywhere near as good anymore, look back at that pic I posted, they look better because of lighting.

I'm also a guy....

Plus I also used to do a ton of ab work. Situps, planks, weighted crunches, all sorts of stuff. It's not like they were just "there".

That was a trade off of being bigger, harder to keep abs.

Honestly, I don't think you should be striving for "abs" anyway, I'm not a fan of them on girls, lean and toned sure, actual solid ab definition, not for me.

Managed all sets of 26.25kg weighted dips, not getting a huge tricep burn on this though which I read is about torso angle. I want the tricep load as it makes up so much of your arm size and mine aren't very big.

Genetics and actual size overall are the big factors. In terms of tricep growth . Lying tricep extensions as mentioned recently in gym thread also close grip bench.

Yeah I'm fairly light build in terms of bone structure (wrist size etc) as I've mentioned.

I had bigger arms when I was bro curling and doing more isolation work but I've had this mandate of trying to stick to compound movements for general health and strength.

My abs are not anywhere near as good anymore, look back at that pic I posted, they look better because of lighting.

I'm also a guy....

Plus I also used to do a ton of ab work. Situps, planks, weighted crunches, all sorts of stuff. It's not like they were just "there".

That was a trade off of being bigger, harder to keep abs.

Honestly, I don't think you should be striving for "abs" anyway, I'm not a fan of them on girls, lean and toned sure, actual solid ab definition, not for me.

I do a ton of ab work, I do ab classes as well as my compound gym movements and my crunches (last night 130 crunches, 120 captain chairs, plus planks in boxing)

Well lucky I'm not dating you then!

Edited by L33SH

lol, I have the same "problem" with Kate.

When she was heavily into her running, and I'm talking she runs up the hill on scorching hot days she's a friggen machine, she had killer abs.

She's devo that she she can't run and doesn't have them now but I like her mi section much more without them.

That's the way it goes though isn't it. She likes her abs, I don't. I like to be a bit bigger and heavier set, she prefers me to be lean and mean lol

Beyond my personal opinions of if you should or shouldn't have them, if you want them keep at it and you'll get there. You're very dedicated and a very hard worker. As mentioned though, some of it is genetics in how you develop.

I had bigger arms when I was bro curling and doing more isolation work but I've had this mandate of trying to stick to compound movements for general health and strength.

Bro curls and isolation work have nothing to do with bigger arms in your case I guarantee.

If you want bigger arms you need to put on more mass. Your genetics will dictate most of where that proportion will end up.

Compound work with a focus on tricep is going to help. Other parts of the arm, shoulder and back need to develop to support bigger triceps as a balanced system.

Your 'light ' bone structure comment has also gone in the bin..... I am confident that is your hang up from your youth and not a comment made by an expert in the field. I think you have made that comment a bit too often for your own good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...