Jump to content
SAU Community

Recommended Posts

G'day,

well I'm new to the forums and new to the skyline sceen, so I thought I'd ask some very basic and general questions.

bought my R33 GTS-T, get it in a week...

what sort of things should I remember when running it? do i need to have an idle time between starting and driving, and between idle and shut down? what sort of kms per oil/filter change? what sort of precautions should I take with it? (Asside from cops lol).

Any information would be great.

my car is a 1993 model R33 GTS-T 93,000kms.

Link to comment
https://www.sau.com.au/forums/topic/422456-the-very-basics/
Share on other sites

As for any car:

- basically drive it from cold, ie letting it idle to warm up wastes fuel and does more damage to the engine.

- as long as you don't gun it right up to your destination, then you can simply arrive and turn off he engine. You DO NOT need a turbo timer.

- standard oil change interval is 5000. Filter every second oil change.

- don't nail it as soon as you get out the drive. Drive sensibly - 3 - 4k rpm max - until the temp gauge starts to register.

Link to comment
https://www.sau.com.au/forums/topic/422456-the-very-basics/#findComment-6796767
Share on other sites

Just treat it like any other car. Service every 5000 to 7500kms, depending on the driving you do.

Just let it idle for a couple if seconds before driving off, and then take it easy for the first few mins until it comes up to temperature.

No need to let it sit and idle once you pull up, just drive sensibly for the few mins before you stop. This does more to cool things than letting it sit and idle, where temperatures can actually increase.

remember to run it on 98 octane fuel.

Link to comment
https://www.sau.com.au/forums/topic/422456-the-very-basics/#findComment-6796768
Share on other sites

alright thanks. other things such as oil? what should I use? I've been using Valvoline oils in my last 2 cars, both have been little buzz boxes (ford festiva and mitsubishi lancer), but never had any oil problems with the valvoline, however are there any recommendations to oils?

Link to comment
https://www.sau.com.au/forums/topic/422456-the-very-basics/#findComment-6798258
Share on other sites

10W-40 Synthetic

I run Penrite 10W-40 in my GT-R (couldn't find any SIN5, so using 10 tenths). You can run 5W-50 or 10W-50 if you wish.

I replace the filter every oil change, use Z442 as it's smaller and easier to replace (R32 GT-Rs are cramped lol). Z145 is the usual filter though.

Link to comment
https://www.sau.com.au/forums/topic/422456-the-very-basics/#findComment-6798820
Share on other sites

every fricken turbo car I have bought had a turbo timer installed and the first thing I do when I get the car is turn the f**ker off! I had this guy ask me if he should get one for his turbo diesel hilux so i spent the next 30 minutes explaining to him why he dosent need one, that they are wank and that anyone in the know thinks your a lolfag. At the end of the convo hes like well I think ill get one just incase.... Assclown!!!

Link to comment
https://www.sau.com.au/forums/topic/422456-the-very-basics/#findComment-6798851
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
×
×
  • Create New...