Jump to content
SAU Community

Recommended Posts

Just back from an interstate road trip, and got defected in Victoria because the muffler was 10mm too close to the ground (Highway Patrol initially stopped us because "your number plates have a black background", but then went over the car until he could find something/anything to defect).

I've had my Stagea for 3.5 years, and the coilovers (set to max. height), wheels, and exhaust (HKS 3") were unchanged since import.

To get the clearance to the minimum 100mm, I had the HKS muffler removed, and a hotdog fitted in its place. It's a little noisier from the outside, but now I've got nasty resonant vibrations inside that are making my teeth grate....

Any suggestions ? I suspect I've made a big mistake in doing the "quick fix" and destroying what was a well-tuned system. :unsure:

Link to comment
https://www.sau.com.au/forums/topic/422685-c34-stagea-exhaust-advice-please/
Share on other sites

You couldn't just get the exhaust hangers reset to bring the exhaust up closer to the underbody? If its only 10mm you should be able to do that without too much fuss.

Yeah, sorry, should have mentioned that that is what the exhaust shop tried first. The hangers were tight as, and really close to the floor. He even tried putting a stand under the muffler, heating the pipe either side, and attempting to add some extra bends, but everything was already really, really tight under there.

Wipe arse with Victorian defect notice and mail back to them?

This is not that different to what Legal Aid Victoria said, "Ignore it, and wait a couple of months until you get a letter from Roads & Maritime NSW".

Don't know about Victoria but in NZ the minimum clearance (without a cert) is 100mm to any solid part of the body or chassis and this excludes things like skirts or exhaust. Have you checked the regs for Victoria?

Hot dogs dont quiet much at all. A small Berkley straight through muffler will flow plenty, and actually quiten down the exhaust. It would fit in either mid or rear position, and they cost less than 100 bucks. Why didn't your exhaust shop just put one of them on ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...