Jump to content
SAU Community

Recommended Posts

First up, not sure if this belongs in this section, so bare with me.

i got a 95 R33 manual turbo rah rah rah,

bone stock engine wise and body, just has some coilovers and swaybars, braces etc.

Im having issues with the Battery going flat after 2 days of no use.

Ive replaced the battery, battery leads and terminals,

disconnected the stereo, disconnected the key hole light around ignition as it would stay on when door closed and locked.

boot light disconnect as ive read they can go faulty. removed the turbo timer as the screen shit itself and stopped working (was working great intill electrical gremlins came in)

i had to removed a lot of unused wiring from a car pc install, was wires taped into the cluster, and fuse box, random shit here and there.

from what i gather now its all bone stock wiring wise minus the alarm and boost gauge.

just seems everything electrical is playing up, is it normal for all the dash lights, and clock and stereo to Dim when light puts on?

I havnt tested the alternator to see if its charging, but i put a brand new fresh charged battery in and it was flat in 2 days.

Any idea's on what to check, how to do it would be great, worse case is ill drop it off at a auto electrician, but would rather try fix it myself if possible.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/422902-r33-electrical-gremlims/
Share on other sites

test your alternator my man. can do nothing until this is done.

Still doesnt explain why i freshly charged brand new battery went flat after 2 days of no driving. i literally put it in, turned key, it fired up. i shut it down and left it.

2 days later, wouldnt crank, just couple starter clicks. stereo worked for a second or 2 and then wouldnt turn back on. connect jump pack and it fires up like its a fresh battery,

i had the same problem years ago, it turned out to be a faulty relay staying energised even when key was out of the ignition = flat battery, id be checking this or any thing else related (as well testing alternator while your at it)

i had the same problem years ago, it turned out to be a faulty relay staying energised even when key was out of the ignition = flat battery, id be checking this or any thing else related (as well testing alternator while your at it)

Have read something to do with the ECU relays, ECU stays grounded or something and thinks its still on. so flattens battery.

I have bought a Multi meter, so will check battery and Alternator ASAP.

Battery tests at 12.65V fully charged

When engine running its 14.22V,

Drops to 9.57V on crank then bumps up to 14.22.

With lights on, AC on, stereo on, and anything else i can put on, and sitting at 2000rpm its 14.17V

after car is off, battery reads 12.57v

test for battery drain it was fluctuating at 0.05 to 0.07 and every 10 seconds or so it would bash up to 7.00, this is testing on a 20amp setting on multimeter with the multimeter between earth cable and earth terminal on battery.

Disconnected the 4 fuses for the Alarm, it sat at a steady 0.03,

Removing the what i believe is the power window fuse from under bonnet it drops to 0.01-0.02

Removing the fuse labeled "electrics" going buy a engine translated picture it drops to 0.00 which im assuming is no battery drain what so ever.

If anyone can shed some light on this, then great stuff

yeah thats what causes most of the drain Mate, 2 posts up i said i removed the 4 fuses for the alarm, guess i should have put its a immobiliser as well haha.

My other R33 reads 0.03 drain and it never goes flat, even after no start in 2 weeks. so in theory the 0.01 from this 33 should mean it shouldnt go flat.... "shouldnt"

Odd thing is i had removed the fuses to alarm/imm over the weekend and it was still flat.. hmm.

Edited by DAN-33

yeah thats what causes most of the drain Mate, 2 posts up i said i removed the 4 fuses for the alarm, guess i should have put its a immobiliser as well haha.

My other R33 reads 0.03 drain and it never goes flat, even after no start in 2 weeks. so in theory the 0.01 from this 33 should mean it shouldnt go flat.... "shouldnt"

Odd thing is i had removed the fuses to alarm/imm over the weekend and it was still flat.. hmm.

Sorry mate, didn't see that post re: the immobiliser. I never really got a "fix" for the immobiliser problem (just assumed it was a power hungry immobiliser) so I just had it on a smart-charger for most of the time (rarely drove the car in the end prior to selling. Maybe a couple of times a month?).

Sorry mate, didn't see that post re: the immobiliser. I never really got a "fix" for the immobiliser problem (just assumed it was a power hungry immobiliser) so I just had it on a smart-charger for most of the time (rarely drove the car in the end prior to selling. Maybe a couple of times a month?).

STILL CANT BELIEVE YOU SOLD IT........

trace all wires back from the alarm mate. disconnect and tag them so you know what goes where. leave it as usual and see if battery discharges. only way to do it really.

also id check the size of your battery. i have some funky jap spec pager alarm on mine and have never had this issue....

yeah alarm is all disconnected and has no power to it, im hoping anyway.

Battery is new, 330cca, unsure of the other numbers though, bigger then the previous battery i know that much.

Im guessing the alarm spikes every few minutes when connected and slowly drains battery, as starter just clicks after 2 days

STILL CANT BELIEVE YOU SOLD IT........

trace all wires back from the alarm mate. disconnect and tag them so you know what goes where. leave it as usual and see if battery discharges. only way to do it really.

also id check the size of your battery. i have some funky jap spec pager alarm on mine and have never had this issue....

Yeah, I know. Miss that car heaps :( apparently the new owner blew the head gasket, which is unfortunate. Hoepfully it gives him the chance to build it bigger and stronger.

yeah alarm is all disconnected and has no power to it, im hoping anyway.

Battery is new, 330cca, unsure of the other numbers though, bigger then the previous battery i know that much.

Im guessing the alarm spikes every few minutes when connected and slowly drains battery, as starter just clicks after 2 days

Bit of a band-aid solution but maybe jsut keep her hooked up to a trickle charger until you can get the alarm/immobiliser checked out. The chargers are about $70 or so from Ricebarn so def. a good investment in my eyes :cheers:

  • 2 weeks later...

Replaced the alarm module with a new one, same brand so plug and play.

seemed good for a week. Battery was flat again this morning.

Getting a 0.02 that flutters to 0.03 and 0.04 reading on multimeter for the battery draw.

Should that number be solid? and not flutter?

Im about ready to drop it off at a auto electrician, its near doing my head in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...