Jump to content
SAU Community

Vq25Dd Tune Tips

jimnz

By jimnz,
in General Maintenance

 Share

Recommended Posts

jimnz Rookie

jimnz

Posted
Posted

hi all,

ive reciently brought a 2002 stagea.

im looking to firstly get the fuel consumption down and secondly get the power up.

i thought there would be more grunt available from the 2.5 V6 and 16.3 liters per 100 in town seems too heavy.

(im getting 9.5 on the open rd) ;-)

ive just done the plugs and fuel filter and service - no change.

the mech put it on the dianogstic and says the o2 senson is due.

research shows the main reason will be the o2 sensor.

also possible fixes:

new temp sensor

high tyre pressures

98 octane (ive been thinking 91 would be cheaper)

id like you views on the above and any other tips

does it have 1,2 or 4 o2 sensors?

where to buy?

http://o2sensors.com.au/search/application?makeID=29&modelID=2575&engineID=3037 $200 each

http://www.amayama.com/search/?q=22690AL600 varyies on oem or copys..

are non nissan parts ok?

thanks for your input.

jim

Link to comment
https://www.sau.com.au/forums/topic/422947-vq25dd-tune-tips/
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

You won't get much of a response in this section, head into the Stagea forum and ask your questions there Jim.

Amayama would be the place for parts, genuine Nissan and cheap. I doubt replacing the o2 sensors will help much, these are big thirsty 2T wagons and you have the smallest engine available. Perhaps you can do a test on them before swapping to see if they are slow to react?

The first thing I would be doing is removing as much of the intake as possible and cleaning all the carbon out of it from the egr valve.(I hate these valves) You will see the swirl valves in the lower intake then, and you can decide if you want to remove them, or simply hold them open? They are there to help improve chamber swirl and lean running on the open road though. You rarely get power without losing economy on the factory ecu especially.

91 octane would cause detonation (pinking), the factory ecu would detect this and drop out timing causing a soggy feeling on acceleration. You have a very lean burning high compression engine so it needs all the help it can get, especially now it is building up inside with carbon deposits. I would be using 95 as a minimum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...