Jump to content
SAU Community

Recommended Posts

Will try this i guess, with a wheel cleaner?

Hopefully brings back a fraction of the original clean look

Yea can use a brush for the inner part of the wheel and just a sponge for the outer face of the rim. Should come up really well, i had trouble with mine for ages but look great after doing the above, and its simple

Yea can use a brush for the inner part of the wheel and just a sponge for the outer face of the rim. Should come up really well, i had trouble with mine for ages but look great after doing the above, and its simple

Thanks bud, I'll let you know how it goes :)

Your GTR looks ace ;)

Best thing to do with wheel cleaner is throw it out. Too caustic, too harsh and not needed. It will eventually pit your wheel's finish and erode your caliper paint. I have found a normal carwash soap on a sponge and a soft tooth brush for the hard to get places is enough and once a month using a light cutter or polish with a wax. Result will be showroom rims year after year. With wheel cleaner after 6 months your rims will look crap but you won't notice because the damage process is slow.

Was thinking of waxing my wheels but was curious how it goes with matte paint. I would be cautious of cutting matte as wouldn't it shine up the dull matte of the paint? Not really sure. Maybe wax only for matte wheels?.. can anyone confirm this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...