Jump to content
SAU Community

Recommended Posts

Will try this i guess, with a wheel cleaner?

Hopefully brings back a fraction of the original clean look

Yea can use a brush for the inner part of the wheel and just a sponge for the outer face of the rim. Should come up really well, i had trouble with mine for ages but look great after doing the above, and its simple

Yea can use a brush for the inner part of the wheel and just a sponge for the outer face of the rim. Should come up really well, i had trouble with mine for ages but look great after doing the above, and its simple

Thanks bud, I'll let you know how it goes :)

Your GTR looks ace ;)

Best thing to do with wheel cleaner is throw it out. Too caustic, too harsh and not needed. It will eventually pit your wheel's finish and erode your caliper paint. I have found a normal carwash soap on a sponge and a soft tooth brush for the hard to get places is enough and once a month using a light cutter or polish with a wax. Result will be showroom rims year after year. With wheel cleaner after 6 months your rims will look crap but you won't notice because the damage process is slow.

Was thinking of waxing my wheels but was curious how it goes with matte paint. I would be cautious of cutting matte as wouldn't it shine up the dull matte of the paint? Not really sure. Maybe wax only for matte wheels?.. can anyone confirm this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...