Jump to content
SAU Community

Upgrading Stock R33 Gts25T

JDM34R

By JDM34R,
in Engines & Forced Induction

 Share

Recommended Posts

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

The first thing i would do is remove the blow off valve and relocate it to the bin! Then i would jump on the search function and find the modifying guide which will give you every bit of info you desire :yes:

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

He speaks the truth. I bought one stock. And i've spent more than enough to buy a GTR easily now.... and it's only just begun!

I bought a modified one and could probably buy 2 GTR's with what i have spent :P

  • Like 1
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Recently bought myself a stock r33 gtst with a blow off valve,

What would be the first thing you would upgrade in the engine bay? What do you guys recommend?

Thanks, Mark.

Upgrade to stock BOV

ARTZ Grand Master

ARTZ

Posted
Posted

Recently bought myself a stock r33 gtst with a blow off valve,

What would be the first thing you would upgrade in the engine bay? What do you guys recommend?

Thanks, Mark.

firstly the R33 is the best bang for buck Nissan on the market today...so congratulations and welcome to the cool club

now...buy a 3 inch bellmouth dump pipe form jjr...200$ great budget mod....get turbotech boost tap for 45$ turn boost to 10-11psi....get copper plugs gapped to 0.8...change all filters and fluids if not done already....this should net you around 180kw on a healthy car and keep you amused for a good while you sort out brake and suspension mods and the reliability of the car in general, at some point install a decent intercooler.... after a year or so you should know that the car is reliable and if its worth spending money on, have all its little issues sorted and have a good feel for how to drive it, save about 5k to start with....then you aim to build a 300kw car ( aim for 280-320 its about as far as you can go and maintain some traction, reliabitiy and stay budget friendly) , it will cost over 5k no doubt...but how far over will depend on how handy you are with the spanners ;)

My build with mostly new parts from stock has been less than 10k including clutch, tuning, and alot of custom fabrication...it has enough grunt to keep up with the best of em...i imagine you haven't paid anymore than 10k for an r33 so for under 20k you can have a car that will beat or at least keep up with just about anyone out there.....you will not buy a good GTR of any description for under 20k, that doesn't need more money spent on it and if built right the humble GTST can easily keep up with alot of GTRs out there, you may even beat a few....So don't listen to these haters..as long as you havent bought a lemon..you're on a winner GL :thumbsup:

  • Like 1
Joshbigt62r Proficient

Joshbigt62r

Posted
Posted (edited)

I recommend to use the search button. But because I'm feeling nice I'll give you a basic quick rundown.

1. A good free flowing K&N panel filter.

2. Bin bov and use a stock gtr bov.

3. Buy a plazmaman intercooler kit.

4. Buy a 3" turbo back exhaust

5. Greddy profec b spec2 boost controller.

6. Hypergear hiflow turbo or equivalent.

7. Adaptronic ecu/ injectors/ tune.

Thats a quick basic rundown mate. Just that there is probably close to 5-7k mate so be prepared. You'll also want to do suspension brakes gauges wheels and the list goes on. I've got a HKS 2535 for sale which would be a ideal turbo upgrade as the standard turbo is rubbish.

5.

Edited by Joshbigt62r
  • 2 weeks later...
dan.1337 Proficient

dan.1337

Posted
Posted

I also recently bought a nearly stock ECR33. Nearly, as it came with a 3" exhaust, pod filter, neon lights and amp.

To give you an idea, here is what I have done:

- Removed neon lights and amp

- Brake rotors and pads

- R33 GTR wheels with Dunlop Direzza Sport Z1s

- Refreshed stock suspension

- Replaced all worn bushings

- Wheel alignment

Here is what I still have planned over the next 1-2 months:

- Flush all fluids (gearbox, diff, coolant, oil, brake) and replace with good quality stuff

- Spark plugs, clean AFM and tape up coil packs

- FMIC

- Oil cooler and filter relocation

- Fuel pump and filter

- Gauges so I know what's going on in my engine

- Accusump

- Power FC + tune

My focus is on reliability as it'll be tracked throughout the year.

mzol89 Enthusiast

mzol89

Posted
Posted

I also recently bought a nearly stock ECR33. Nearly, as it came with a 3" exhaust, pod filter, neon lights and amp.

To give you an idea, here is what I have done:

- Removed neon lights and amp

- Brake rotors and pads

- R33 GTR wheels with Dunlop Direzza Sport Z1s

- Refreshed stock suspension

- Replaced all worn bushings

- Wheel alignment

Here is what I still have planned over the next 1-2 months:

- Flush all fluids (gearbox, diff, coolant, oil, brake) and replace with good quality stuff

- Spark plugs, clean AFM and tape up coil packs

- FMIC

- Oil cooler and filter relocation

- Fuel pump and filter

- Gauges so I know what's going on in my engine

- Accusump

- Power FC + tune

My focus is on reliability as it'll be tracked throughout the year.

hey mate how big of a job was doing all the bushes...pretty sure mine are all ratshit...did u pay someone or do it urself? cheers

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

hey mate how big of a job was doing all the bushes...pretty sure mine are all ratshit...did u pay someone or do it urself? cheers

You would need a press or some handy tools to do them!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...