Jump to content
SAU Community

S A U - N S W Texikhana - Queen's Birthday Holiday Monday


Recommended Posts

I'll come to check out this Texi thing, all new to me. Anyone can give me a ride along?

Also that soundtrack in the video makes me cringe.

I'll be there to help out in the morning if you'd like a lift Ricky.

And thanks R-o-B for helping out too :)

I'll be there to help out in the morning if you'd like a lift Ricky.

And thanks R-o-B for helping out too :)

Thanks for the offer Terry, but I meant if someone could offer a ride along in their car during Texi to get a feel for it. Unless you'll be taking the N1 for some donuts then I shotgun! ;)

Going to see if I can get leave for this.

Got a plumb back for the gate. And some tyres I need to get rid of. :)

It feels so cruel plumbing back the gate :(

With rego? =-o

Rego would be good! Found a couple of decent S13's which fill the shitbox skidder requirements very well.

The Merc truck might be a bit of fun on the skidpan :P

Rego would be good! Found a couple of decent S13's which fill the shitbox skidder requirements very well.

The Merc truck might be a bit of fun on the skidpan :P

This i wanna see!

Rego would be good! Found a couple of decent S13's which fill the shitbox skidder requirements very well.

The Merc truck might be a bit of fun on the skidpan :P

I recken that would make a good SAU "rego trailer" or something ;oD

Sorry - haven't had time with work.

Will try and get something happening on the weekend and will respond to everyone who's entered. More people are always appreciated, there's still spots.

No need to apologise man :) If there is anything i can do to help just send me a PM!

I'm going to do lid skids all day!

Be rude not too!

I'll be helping only on this one.

Going to see if I can get leave for this.

Got a plumb back for the gate. And some tyres I need to get rid of. :)

Do it.

Might try come down in the Stag for this. See how we go :D

Would be good to see a C34 that can do real skids !

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...