Jump to content
SAU Community

Recommended Posts

Hey guys,

Just filled up the tank then as i was walking back to the car i noticed fuel dripping..

Got home and jumped under the car again and saw it was still going.

When i filled up the tank the pump clicked as it does when it's full, but i saw i had 20L left til full tank (just did the sending unit fix so that's not the problem) so i thought i'd throw the nozzle in again just for 2 seconds then it clicked again. Could that of been why it's dripping from here? I haven't hit anything that could cause a leak.

Help..?

Edit: Video didn't upload, how do you get videos to play on here?

Edit #2: Video attached

View My Video

http://tinypic.com/player.php?v=291eqhg&s=5

Edited by Seano350GT
Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/
Share on other sites

My bet is that when you did your "sending unit" fix, You didn't correctly reassemble the unit. The large o ring around the top is hard to seat once removed.

Go to Nissan and buy a new one, and take it appart, and re seat the o ring.

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830159
Share on other sites

that's what i'm thinking Alex. I did the whole sending unit fix myself but the only bit i did not do was reconnect the main hose to the tank - my friend did it while i was over the other side of the car but i asked him to make sure it's on properly.. i haven't noticed fuel leaking in the last 2 weeks though.

Just checked it again, still dripping really slowly though. Going to pull the seat up and check everything.

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830209
Share on other sites

The main hose is pretty idiot proof, but the o ring has caught people out before.

It swells in contact with fuel, making it hard to seat properly. Well worth buy g a new one from Nissan. Ask for a 350z fuel tank o ring, the large one, and you'll get the right thing.

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830225
Share on other sites

ok so i pulled the seats forward and lifted off the cover. Seems like the main hose to the tank was not fully connected, it had about a cm of movement until i was fully connected. There was also a small pool or fuel around that area too which i cleaned up. Turned the car on and jumped under it and noticed the dripping came to almost a complete stop. Turned it off and packed up all my crap then looked again and it was still dripping a tiny bit. Will look at it in half an hour, also that O ring you speak of was not touched when i did the sending unit clean so it won't be the issue unless it's somehow gone faulty.

My mate that did it isn't the brightest tool in the shed only reason i got him to do it was because he's smaller than me and it's so f*cking uncomfortable to get into the back of our car lol..

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830247
Share on other sites

ok so i pulled the seats forward and lifted off the cover. Seems like the main hose to the tank was not fully connected, it had about a cm of movement until i was fully connected. There was also a small pool or fuel around that area too which i cleaned up. Turned the car on and jumped under it and noticed the dripping came to almost a complete stop. Turned it off and packed up all my crap then looked again and it was still dripping a tiny bit. Will look at it in half an hour, also that O ring you speak of was not touched when i did the sending unit clean so it won't be the issue unless it's somehow gone faulty.

My mate that did it isn't the brightest tool in the shed only reason i got him to do it was because he's smaller than me and it's so f*cking uncomfortable to get into the back of our car lol..

Ummm, you have been in the tank, which means you have disturbed the o ring.

The outlet hose should click on so the clip clicks. When you put the whole hanger unit back in, you need to get he o ring seated right. Just use some brake cleaner to wash the fuel off and see where it's coming out.

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830290
Share on other sites

My mate that did it isn't the brightest tool in the shed only reason i got him to do it was because he's smaller than me and it's so f*cking uncomfortable to get into the back of our car lol..

I don't see what is to "lol" about here.

It seems that neither of you are the sharpest tools in the shed. No offence but messing with critical systems such as fuel and brakes without at least doing the homework beforehand is not only dangerous to yourself but to others as well.

General rule of thumb is when you've disturbed seals in such systems, NEVER REUSE THEM!

And personally, if I don't consider someone to be all that intelligent, the last thing I would do is allow that person to work on it.

So, get a new o-ring from your dealership, grab a copy of the workshop manual and do some homework. Otherwise, pay a mechanic to help you avoid catching fire.

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830455
Share on other sites

 

Ummm, you have been in the tank, which means you have disturbed the o ring.

The outlet hose should click on so the clip clicks. When you put the whole hanger unit back in, you need to get he o ring seated right. Just use some brake cleaner to wash the fuel off and see where it's coming out.

 

Do you happen to have a part # or something to make it easier at Nissan?

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830663
Share on other sites

So i got up this morning and checked the car, no fuel leaking underneath at all. Started it and got to work, checked it again and it's leaking same as it was yesterday. I will grab an O-ring from Nissan today. I am getting the boys in the workshop here to look at it today, they are qualified techs..

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6830665
Share on other sites

My bet is that when you did your "sending unit" fix, You didn't correctly reassemble the unit. The large o ring around the top is hard to seat once removed.

Go to Nissan and buy a new one, and take it appart, and re seat the o ring.

This guy, yup, he knows.

Link to comment
https://www.sau.com.au/forums/topic/424268-fuel-leak/#findComment-6831135
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...