Jump to content
SAU Community

Recommended Posts

 

has anyone ever heard the noise that would be made from a car that is driving with virtually no automatic transmission oil? Is it a really loud churning noise?cheers

 

No oil = no running. Needs gearbox oil to go.

what if your driving and you have a hole in the box and its leaking and leaking, im sure itll run for a bit, i want to know for that minute or however long it will run what noise it will make. If anyone has had first hand experience with this let me know

I know that you'd be an idiot to drive with a smashed and leaking box and that it will be slipping etc etc, my question is simple, if anyone has heard that noise and can describe it to me could you please do so

cheers

No. I've tried to drive a car with little to no transmission fluid. It didn't make any funny noises or smoke, it just didn't move until I put enough in it.

If your transmission is making noise then there is definitely something wrong.

Low to no trans fluid -

It will make a grindy noise, it will feel like a slipping clutch, it will stop, it will not start if it is empty or too low. It will not change through gears.

It will NOT blow smoke.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...