Jump to content
SAU Community

Recommended Posts

dude, that is hella PHAT!!! what rims and suspension u got going there?

sorry, don't know of any 350z sites, but maybe you could just search for 300ZX of Fairlady sites, i'm sure there would be a few of those forums. And would be a good source of VQ engine info, mods etc.

i'm sure there are enough knowledgable ppl here tho to help you most ur q's!

again, awesome ride mate! :rant:

cheers

Link to comment
https://www.sau.com.au/forums/topic/42491-350z-forum/#findComment-868079
Share on other sites

Guys,

Thanks heaps for the info - I'll check them out. Also Thanks for the nice comments - Much appreciated.

Just in the market for an induction upgrade and trying to find someone who imports aftermarket products from the US....

If anyone knows of anyone please let me know

Once again thanks in advance

:)

Mike

Link to comment
https://www.sau.com.au/forums/topic/42491-350z-forum/#findComment-869365
Share on other sites

Oops sorry forgot to answer your question

The Rims are Zenetti Fusions

19x 8.5 in front with 245/35 and

19x9.5 at the rear with 275/30

Suspension H&R Coils inch and a half all round. By the way if anyone after H&R, Bilstein or suspension products please feel free to drop me a line at [email protected]

take care and thanks again

Mike

Link to comment
https://www.sau.com.au/forums/topic/42491-350z-forum/#findComment-871294
Share on other sites

  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...