Jump to content
SAU Community

Recommended Posts

Further to me buying a cage, it's time to get a harness.



My question really centres around whether it's better to get a 5 point or 6 point harness and the mounting of both.



With a 6 point does it/can it use a single mount point under the seat or does it need 2? (I understand it needs to go just back from the chest line).



Further to that, I'll be making a new seat frame to get my seat lower for helmet clearance and wondered if I can integrate mounts into the seat frame (a cross bar between the two sides under the seat) or if should be mounted to plates on the floor pan or something?



I'm looking at these two examples which ahve 3inch shoulders are FIA approved and seem to be very popular in the states.



http://www.safedrives.com/proddetail.asp?prod=7000



http://www.safedrives.com/proddetail.asp?prod=GF-C7001%2F7101

Link to comment
https://www.sau.com.au/forums/topic/425293-time-to-talk-harnesses/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'd get a 6 and spread the pickups out as much as you can- it can reduce the pressure on your testicles :)

2 other points to consider. Firstly - will you be running a HANS device? Harnesses for HANS devices have a 2" shoulder strap. Non-HANS are 3". If you run a HANS harness you can only run it with a HANS on for some reason. (Well if you get over-zealous CAMS officials that is. But then most of them are.)

Secondly - would you ever like to run it as just a 4 point (I used to prefer doing this at say DECA where a bit of body movement was handy on the skidpan). If the answer to that is yes then make sure you find a harness with the buckle on the waist strap rather than on the crutch strap.

I'd considered the load on the boys...

No HANS device for me, I don't have the helmet for it and won't be doing any hardcore racing etc in this car.

I hadn't considered running as a 4 point, could you not just run the crutch straps looser if you wanted some movement?

Do you have an example of a harness that has the option to remove the lower straps?

If you are entertaining the idea of 5/6 point then have a good look at your seat. I think for skinny guys a 4 point harness with the side straps mounted at the correct angle work fine for 99% of people. If you ever want to upgrade then you can get a crotch strap then as most 4 point harnesses can be upgraded with a crotch strap at a later date. That way you also avoid the issue Snowie pointed out re the buckle being on the waisst strap

What count's as skinny.

I'm 6ft and 87-88kg, will probs get to about 90kg tops.

I'd be happy with a 4pt for simplicity but everyone has been on me about "submarining".

I'd likely use the factory mount points for the waist straps.

You've seen my seat on the cage thread Velo Podium V1

I'll keep that in mind.

There's not much else in the way of 4pt FIA harnesses besides the velo and the rpm one, anything else worth considering?

And is 4pt going to be enough.

I guess if the FIA cna approve them then they must be OK, and at the moment I just use the normal belt anyway...

If the answer to that is yes then make sure you find a harness with the buckle on the waist strap rather than on the crutch strap.

This man speaks the truth.

I have a Velo 6-point and it does rub neck a little bit, but its a decent harness otherwise.

I just rang Velo and confirmed it can be wrap around mounted.

He also said that you get 10yrs out of it, 5yrs standard and then at a CAMS event they honour for another 5 so decent value, I might just go with that.

Anyone got any mad deals on Velo gear?

Ebay seems cheaper, even for the more Euro popular brands like TRS and Sparco.

Not to be argumentative, but the TRS magnum 4pt is 92quid on rally nuts and 138 at your link. The sparco is 112 versus 149.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
×
×
  • Create New...