Jump to content
SAU Community

Recommended Posts

Mate if some one wants, even if from this GB, it's all dog eat dog.

Wouldn't have an issue at all :thumbsup:

I'd jump on it myself if I wasn't chasing something to handle moar powah !

We can get them brand new delivered for almost the same price man, don't bother trying to sell it second hand for that :S

it is 500km old, its available now and i am negotiable.

i started a touch high as when people see "oh he is negotiable" i will give you an unrego'd S13 and a handjob for it

Currently on 330kw/450hp looking at 420kw/570hp, with some head room.

no where near the big boys toys

standard twin plate coppermix will go 600whp with ease - proven

i am upgrading as a guy with an identicle set up to me over here run up 680whp and although "people have done it" on a TP copper mix i didnt want to risk it on a race car.

has been on the market a month keen to shift it, need the cash to maintain momentum on my build PM me a offer.

sorry to invade your thread again.

Hi Everyone - Group Buy Not Proceeding. My appoligies :(

But I am happy to put you onto a couple of people who can supply at very good prices if you pm me for details

As aluded to previously:

" As it appears I can't do much better than you could do yourself :( "

Admins please lock down/out/over !.

Cheers

Richard

PS. I have not bought the 2nd hand one posted above. I have not yet bought a new one either.

Edited by Sinista32
  • 3 weeks later...
  • 2 months later...

Hey mate, the two key people are;

Marcus aka Elrodeo666 [email protected]

and Jesse Streeter [email protected]

Both are awesome and members of this forum

just send an email :thumbsup:

Edited by Sinista32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...