Jump to content
SAU Community

Recommended Posts


Event:
SAUQLD Dyno Day!

Description:
Its time for the 2013 dyno day, where we can check up on our cars the week before the drag day. The day will be held by Sean at EFI performance which has relocated to Southport, so this will also be a good time for us to get acquainted with their new shop. The day last year was a good event and hopefully we can make this year even better!

You will get 3 power runs on the dyno and a print out. Your entry fee will also cover a BBQ lunch and drinks!

Location:
Unit 3 / 30 Bailey Crescent,Southport.
Approximately a 50minute drive from the Brisbane CBD
EFImap_zpsb8883526.jpg
click for link to Google maps

Date:
Saturday 22nd of June 2013

Time:
From 8am to 1:30pm

Cost:
$55 for members, $65 for non members. Price includes 3 power runs on the dyno and a sausage sizzle and drinks.

Requirements:
Your car, obviously! It will have to be a 2WD car however. R33-34 GTR owners will need to drop their front drive-shafts out to run in RWD, R32 GTR owners can just pull the fuse.

A disclaimer: A dyno puts a lot more strain on your engine than regular street driving. Sean and his team have years of experience working with performance cars and whilst SAU QLD and EFI will take utmost care with your pride and joy, we do not accept any liability if something was to unfortunately go awry. If you have any concerns or questions about putting your car on the dyno, please contact one of the execs and we can refer them onto Sean at EFI.

Attendees:

  • Sneakeypete
  • Cadmoon
  • boiracer
  • kiwi_Phil
  • Kennysw82
  • mumslayer
  • smity42
  • grae35
  • Lazy-Bastard
  • impact_blue
  • Team Supra 1
  • Team Supra 2
  • Team Supra 3
Link to comment
https://www.sau.com.au/forums/topic/425592-sauqld-dyno-day-2013/
Share on other sites

So what are possible things that can go wrong and how can they be avoided?

Completely destroy motor, second coming of Christ you know the regular.

[Rant] My dyno figures will be lamer then a sick horse, screw you stall converter! :angry:

Either way a dyno is a tuning tool, it's all good to make 11ty killa what's but if your running 13.6 what's the point [/rant]

The main issue is that there is alot more resistance on the driveline than when normally driveing. Think of it as:

normal driving = you running along the road

Dyno pull = you running up a hill with a bungy strap attached to a tree at the bottom

Added strain makes things break easier, but just as in real life the chances that running up that hill will kill you are slim..... Now if Tony or Luke was running up that hill the chances may be different :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...