Jump to content
SAU Community

Recommended Posts

A better article, but from what it is saying i think it is only PART of the Geelong plant closing.... If the Engineering side stays open i think it will be OK

http://www.bordermail.com.au/story/1521557/gallery-ford-to-shut-australian-plants/?cs=12

Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862028
Share on other sites

Holden won't be far behind. The Broadmeadows plant is simply massive. Definitely one of the top 3 buildings size wise I have ever seen, bigger than most International airports. Sad that so many people will be out of work coz of this. Does this mean the end of the Falcon then?

Yep its sad times indeed! You would imagine the Falcon will go with it? :/

I did my apprenticeship with Ford and thought they would always be fine, its a sign of the times when they start to feel the pinch!

Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862083
Share on other sites

 

Yep its sad times indeed! You would imagine the Falcon will go with it? :/

I did my apprenticeship with Ford and thought they would always be fine, its a sign of the times when they start to feel the pinch!

 

nah, wont be the end of the falcon. It will just be the end of it as we know it - It will become a rebranded US FF platform. They have already indicated that they planned to do this from 2016 once they ended production of the barra 6 motor.

Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862094
Share on other sites

   

nah, wont be the end of the falcon. It will just be the end of it as we know it - It will become a rebranded US FF platform. They have already indicated that they planned to do this from 2016 once they ended production of the barra 6 motor.

So basically the end of the Falcon :P

Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862098
Share on other sites

From Wheels Magazine:

"It's official Ford Australia will close its doors in October 2016. 1200 jobs to be axed. Ford says finances no longer viable, having lost $600 million over the last 5 years and $141million in 2012 alone."

Another article here (from after the press conference)

http://www.smh.com.au/business/uncompetitive--ford-pulls-out-20130523-2k2cf.html?skin=text-only

Edited by alex182
Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862149
Share on other sites

it's bad news for the Australian manufacturing industry. Unfortunately the parent company has not seemed to have had any interest in keeping the local arm alive for years. I believe that poor marketing was the final nail in the coffin.

It really is bad news but the industry has been on a decline for a while! It is scary to think what the future may hold for the rest of the industry....

Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862249
Share on other sites

Toyota and Holden are still increasing sales and profits - Hyundai is now the fastest growing car manufacturer.. everyone else should be fine. Ford just kept producing the same product every year at stupid prices and barely changed anything. The costs involved in manufacturing the cars especially labour impacted Ford's failure the most..

Link to comment
https://www.sau.com.au/forums/topic/425724-ford/#findComment-6862325
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...