Jump to content
SAU Community

Recommended Posts

Arrived couple days ago from brad profab for our dry sump set up. Also Bc picked up a pump elsewhere which saved us heaps of cash, Brett and dean have heaps of contacts in the Motorsport industry so we are lucky or else this new build would honestly not be possible.

post-19978-0-51503600-1370140227_thumb.jpg

post-19978-0-40832000-1370140279_thumb.jpg

Now some new aero and spray job required, so off to Andrew Kinsmore, Kinzy paint and panel to attach our new side skirts, spray up the interior and engine bay. Decided to match it all in same colour. Our old n1 side skirts I thought looked awesome, always loved them but to much air was getting under the car and causing lift, so added these which dropped the 220mm front and 240mm rear gap down to 100mm, open class allows ride hight at 65mm, we can perhaps lower it a little more, there will be a full flat floor after time attack which will get the hight down.

post-19978-0-92915700-1370143100_thumb.jpg

Mate that thing is a rig 470kw is leathal on the track you aiming for more power with precision turbo?

Our weakest link will be the block I believe, 450-500 should be fine for time attack, if we run 470 plus for a lap or 2 then we will pull the engine apart for a refresh after the event. The biggest advantage over the new engine turbo set up is when the power delivery will kick in and the higher rev range, as prior we didn't exceed 8200 I believe from memory.

Fitting up the front canards. Wool tuff test to see how the air flowed around the skirts, and to position the canards correctly. If only I had another 100k to spend on aero...then we could try pro class. I really appreciate when I see teams going flat out with aero as it makes a huge difference, but running pro class these days comes down to cash.

One of many tests performed at Bc automotive.

www.youtube.com/watch?v=Hi3Ym22ruog

post-19978-0-61161800-1370144881_thumb.jpg

Our new goal lap time for Phillip Island is 1.31, we believe this will equate to around 1.29-1.30 at Sydney Motorsport. Going by the Gt series cars and deans experience there's about 2 seconds difference in the track if set up correctly. I will post more as work progresses, if you would like to follow the build on Facebook or through Bc automotive the links are below. The build will be complete by July 7th latest to get back for more testing at the island.

Hope the links work,

https://www.facebook.com/BCAUTO

http://www.bcautomotive.com.au/

Good to see it coming along.

The touring car guys used that wool test in years gone by as well.

The interesting part when fitting up the side skirts in front of the rear tyre the air would stall(wool tuft would just fall), so we pulled the side skirts out just a little in line with the wheel and it would flow perfect without the tufts stalling. So we will fit it up like this and painted by Tuesday. Thanks heaps for your work on the oil pan, speedy return and great work.

Excited.

Any idea how many Victorian cars are competing? Congrats on club class dude, will be a fun few days. I've noticed Wtac aren't posting all competitors as most cars aren't ready yet, and they are building up the hype.

While I'm waiting for the painting, thought I'd share some other work that has been carried out by dean and Brett over the years.

Ap racing front and rear brakes, with brake bias adjustment. These were a massive step up in stopping performance from the csc brakes in the past. Also repositioned the oil cooler to the side vent which solved the engine oil temp getting hot after even 2 laps in the past.

post-19978-0-34397000-1370305681_thumb.jpg

Dean made up an aircraft aluminium stainless steel side exhaust which you can pick up with 2 fingers. Eliminating the old full length exhaust saving around 12 kg. Needs to be modified to fit through the new side skirts.

Exhaust looks awesome, sorry I must be confused with the material.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...