Jump to content
SAU Community

Recommended Posts

a bit of fishing line and some 'bug/tar remover' to get rid of the adhesive and you should be fine.

Personally I don't like the debadged look, it makes me think 'dodgy backyard repair job', but each to their own. Certainly better than having badges in the wrong spots as I have seen on some cars.

I had my badges taken off when i had my boot resprayed from a scratch. At first i liked the debadged look but i kinda want the badges on again.

Problem is, im pretty anal about getting the badges back in the right spot and straight. There doesnt seem to be any information in regards to the exact positioning of the badges :ermm:

If you're going to remove the Skyline badge you may as well get rid of the 350GT i don't think the nissan badge and the 350gt badge without the skyline would look good at all. I prefer my car debadged front and rear, only because these are rare cars and not many people know what they are.

I have heard that if you de-bdage the big nissan badge on the boot, it leaves a mark?? Like a outline of the badge....

can anyone confirm this?

Depends on what color the car is, i have personally seen those outlines you talking about but it was on a Red v35 (very prone to fading) but other colors might be a different story.

doesn't bug/tar remover get rid of that residue? when i bought my car the previous owner looked like he literally attacked the rear nissan badge with a screw driver and left a long/deep scratch where it was.. got the boot resprayed the painted removed the other badges for me.

This is how mine looks, dirty with a boot lip too.

This is after a detail, since removing the skyline badging reveals slight indentations where the lettering used to be.

I used fishing line and bug and tar remover that was in a green spray bottle but never again because it slightly stained the paint, another reason why I had the car detailed.

post-105738-0-64659500-1370235619_thumb.png

Edited by Triggs
  • Like 1

doesn't bug/tar remover get rid of that residue? when i bought my car the previous owner looked like he literally attacked the rear nissan badge with a screw driver and left a long/deep scratch where it was.. got the boot resprayed the painted removed the other badges for me.

I'm not talking about the glue residue, what I'm talking about is the slight indents the "NISSAN" badge will leave after removal.........

does anyone else have this issue after they debadged???

This is how mine looks, dirty with a boot lip too.

This is after a detail, since removing the skyline badging reveals slight indentations where the lettering used to be.

I used fishing line and bug and tar remover that was in a green spray bottle but never again because it slightly stained the paint, another reason why I had the car detailed.

You can't really see it in the photo...so I guess a cut and polish helped you remove the indentations?

does it really leave 'indentations'? or is it just an outline because that part of the paint hasn't seen the sun over the last 10 years?

I wouldn't have thought Nissan would 'indent' the panel for the badges?

I definitely think it looks much cleaner without the skyline wording attached to the boot.

I will attempt to give it ago on a v36.

Anyone done one on a v36?

My V36 is debadged, both the nissan and skyline badges are gone.

292497_10151482112449912_314936203_n.jpg

Got mine off with a heat gun on very low to warm up the glue, then rubbing in small circles with a white cloth and some eucalyptus oil. (I stress white cloth as I used a green microfiber first and it actually transferred color into the paint - had to cut n polish it out with some pretty aggressive compound).

post-22161-13703388815778_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...