Jump to content
SAU Community

Recommended Posts

Made up a second catch can/windscreen washer bottle and also a power steering reservoir.

I plan on running two catch cans, one on the drivers side retuning to the PVC and to the sump and the

second on the passengers side returning to the inlet of the turbo and the sump as well.

I'll be able to hide the boost control valve and windscreen washer pump in the cavity under the tank.

IMGP2521_resize_zps0be3bd9d.jpg

IMGP2522_resize_zps5e9d7e18.jpg

IMGP2523_resize_zpsf0aa7a8d.jpg

IMGP2520_resize_zps04013510.jpg

IMGP2527_resize_zpsdada68f1.jpg

  • Like 2
  • 1 month later...

Small update, welded up the intake pipe and return from the synapse diverter valve to the intake.

Don't think I will use the air box I made.

IMGP2530_resize_zps1bd33709.jpg

Also trying to work out a bonnet hinge, going to make some in the style or R33 boot hinges.

These are just some pieces of flat bar to work out the lengths of the links and where the pivot points will be.

Should be able to make the bonnet swing up 90 deg.

IMGP2532_resize_zps55e12ca2.jpg

IMGP2531_resize_zps3276425c.jpg

IMGP2533_resize_zps1eba5a56.jpg

  • Like 2
  • 2 weeks later...
  • 1 month later...

Bit of an update, brought some wheels, crossfire D-spec 18x9.5 also brought some hardrace rear arms. Started extending the sump

and filling in the bottom of it to hopefully help oil return.

IMGP2568_resize_zps578e42e8.jpg

Little bit of stick out.

IMGP2559_resize_zps0ca0ccd2.jpg

IMGP2547_resize_zpsaf299f8c.jpg

IMGP2552_resize_zpse2da0b54.jpg

IMGP2572_resize_zps49e918ba.jpg

IMGP2576_resize_zps81be60c0.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...