Jump to content
SAU Community

Recommended Posts

Nissan Skyline r33 manual 150,XXXkm

Brand new Tyres/Rims ARK design 18x9.5 all round

Brand New Clutch (heavy duty replacment very nice to drive)

Brand New Front Brakes pads & Rotors

Have a very tidy skyline will excellent paint, car is very clean inside and out with only basic mods.

Front mount intercooler

Dump Pipe and Exhaust

Inside it has a sparco steering wheel and Tomie gear knob. Has a flush mounted apline type R 10" sub in the boot to save space.

will load some photos of inside soon when I get some more time.

open for offers and can do it cheaper if wheels not incouded as i have a set of origional rims i can sell it on if you have your own shoes.

Also can put on 12 Months rego if it goes for advertised price!

Will also give it a service this weekend coming Oil/Filter/Plugs

Car is located in Melbourne

Any questions sms or call 0416250596

No Time waster and there will be no test drives unless you have money on you that i can hold while sitting in the passanger seat.

No Swaps.

$8,500 ono

post-51272-0-55180600-1371371213_thumb.jpg

post-51272-0-64112300-1371371216_thumb.jpg

post-51272-0-82295900-1371371219_thumb.jpg

post-51272-0-50910600-1371371223_thumb.jpg

post-51272-0-38407900-1371371226_thumb.jpg

post-51272-0-31655300-1371371229_thumb.jpg

post-51272-0-18675400-1371371234_thumb.jpg

post-51272-0-98652200-1371371237_thumb.jpg

post-51272-0-84411200-1371371241_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...