Jump to content
SAU Community

Recommended Posts

Guest Robo's

Well finally did it at Calder tonight with my stock turboed R33 GTST running street tyred Sumituno's HRZ'2's with a [email protected] with a 2.02 60 foot. I was completely wrapped.

First run saw a PB of [email protected] with a 2.09 60'foot. Next run was surely a 12 second run with a 1.97 60' foot but missed 3rd gear and coasted to a 13.6. Then the final run of the night saw the above result [email protected].

All this result with the standard turbo running 13psi, still using the trusty SAFC, FMIC, Full 3 inch exhaust, Boxed up Pod, and cam gears.

Got to be happy with that :rofl:

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/
Share on other sites

  • Replies 123
  • Created
  • Last Reply

Top Posters In This Topic

Well finally did it at Calder tonight with my stock turboed R33 GTST running street tyred Sumituno's HRZ'2's with a [email protected] with a 2.02 60 foot.  I was completely wrapped.

First run saw a PB of [email protected] with a 2.09 60'foot.  Next run was surely a 12 second run with a 1.97 60' foot but missed 3rd gear and coasted to a 13.6.  Then the final run of the night saw the above result [email protected].

All this result with the standard turbo running 13psi, still using the trusty SAFC, FMIC, Full 3 inch exhaust, Boxed up Pod, and cam gears.

Got to be happy with that :rofl:

Good Job! Best I could get out of my stock turboed RB25 was a 13.8 @ 104 with a 2.1 60ft. Of course my RB25 is in an S13 body so I should be a little quicker. I am running stock IC, stock ECU with no fuel correction and 3" exhaust. Looks like cam gears and SAFC should be on my list of future mods.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873475
Share on other sites

great effort robbo it means a 12 is not far away for me either had a similar mph with less power than now.

calder seem to have made the surface much better for launching heard of some great times last night dr-drifts ca datto 1600 ran 12.003 @ 113 mph on street tyres and he did a 1.7 60'. also a gtr did 11.6 @ 120 mph.

meggala

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873518
Share on other sites

Awesome! Congratulations, thats very impressive without heaps of mods. In NZ the quickest R33s are barely touching into the 13s :rofl:

I'm just a n00b here, but I have been quietly tracking your progress and soaking info, because I have been building up parts for my R33 - and your car for a while had very similar to the mods I decided to do for my "first stage" (cold air intake, cat back exhaust, and S-AFC2) and read quite a few posts re: your car and S-AFC tuning which looked very positive for the direction I was heading.

What clutch are you running?

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873545
Share on other sites

Guest Robo's
Awesome!  Congratulations, thats very impressive without heaps of mods.  In NZ the quickest R33s are barely touching into the 13s :rofl:

I'm just a n00b here, but I have been quietly tracking your progress and soaking info, because I have been building up parts for my R33 - and your car for a while had very similar to the mods I decided to do for my "first stage" (cold air intake, cat back exhaust, and S-AFC2) and read quite a few posts re: your car and S-AFC tuning which looked very positive for the direction I was heading.    

What clutch are you running?

Running the Extreme Daikin Heavy duty. Its been in for nearly a year now with about 20 runs down the strip and not one problem. Not bad for $400.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873593
Share on other sites

Good to see another std turbo r33 into the 12's, still not sure where im gonna find a full 1sec but it'll be fun (and expensive) trying :rofl:

R33vit ran a 12.9sec on the std turbo with a "road tuned" P/Fc which is extremly impressive too.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873716
Share on other sites

Running the Extreme Daikin Heavy duty.  Its been in for nearly a year now with about 20 runs down the strip and not one problem.  Not bad for $400.

No, not at all - I haven't had any problems with mine at all... but so far I have only been running around on stock boost, untuned SAFC and a catback exhaust - so no real stress for it YET :P I run 255s on the back so I am a bit worried that after the car is tuned with a bit more boost - it might get a bit more upset.

Anyway, keep up the good times guys! I'll watch with interest how you guys are going and see if I can get an R33 representing a little in NZ as well :rofl:

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873744
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...