Jump to content
SAU Community

Idicators Not Working [R34 Gtt]

Eps

By Eps,
in General Maintenance

 Share

Recommended Posts

Eps Enthusiast

Eps

Posted
Posted

R34 GTT 1998

My indicators have just stopped working as I got to work today. Hazzard lights dont work either. However my alarm works just fine and unlocking/locking the car with the alarm lights them up.

Depressing the hazzard lights button I hear the relay click once under the steering wheel.

When the alarm ticks the indicators, it seems that it is slightly faster than usual... not a broken indicator though - Maybe it bypasses the relay? - i dont know...

I can't find the fuse for the indicators, but the fact the alarm runs them fine makes me think this is not an issue, unless the alarm bypasses the fuse and relay.

Any tips?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/427685-idicators-not-working-r34-gtt/
Share on other sites
Eps Enthusiast

Eps

Posted
  • Author
Posted

I just removed the NILES IF332 OEM flasher relay and when I opened it it had burn spots on the plastic. It looks like a piece of metal broke off and shorted...

I placed a Tridon EP35 in to replace but it made no difference yet.

The relay still works though. I will check fuses as that seems likely.

Eps Enthusiast

Eps

Posted
  • Author
Posted

Fuses are all good. Funnily enough, I armed the alarm, hit the hazzard button and the indicators came on and went off and now cease to function when the alarm is armed... but all fuses are still okay... wtf???!! Someone somewhere said something about an indicator controller... where/what is it?

darksky34 Mentor

darksky34

Posted
Posted

hey mate sorry to sidetrack you but do you mind telling me where to get to the flasher relays? pic of the location would be great if possible.

I want to put in some LEDs for my rear indicators and i know that without a relay they will flash really fast - so i bought a relay switch thingy which will increase resistance, it's a plug type thing so no soldering necessary. any help would be much appreciated, sounds like you know where things go!

Eps Enthusiast

Eps

Posted
  • Author
Posted

Pop your head up under the drivers footwell and you shouldn't see a whole lot... grab a light and look for a black relay on the door side of the steering column. To help you can flick on your indicators and you will hear and feel it clicking. Unplug it to confirm that its the correct one. :-)

Eps Enthusiast

Eps

Posted
  • Author
Posted

Thanks mad. I did replace the head unit a few months ago. Could be likely.

I figured it could be a loose connection but the fact it still controls the relay made me look past it. Ill check on the weekend :-).

Has anyone got a wiring diagram inclusive of indicators? Ive seen a few but not one that details indicators.

  • 3 weeks later...
Eps Enthusiast

Eps

Posted
  • Author
Posted

Today I had another detailed look under the dash. I found a small fuse box going to the alarm with 2 fuses. a 5 amp fuse was blown. Replaced it with another 5 amp. It blew when alarm lit the indicators for 1/2 a second. Put in a 10 amp fuse now and the indicators work with the alarm!

The indicators still do not work with the stalk or hazard switch. I pulled out the hazard switch and connected it without the air vents. It makes a singular tick on the relay when depressed so it seems it still works. Still no indicators.

I removed the black box mounted in front of the flasher relay and check inside. All seemed okay. Just a smaller black box. No burns or smells.

What is in the brown relay thing?

I'm starting to think maybe the alarm is causing the issue...

:domokun::domokun::domokun::domokun:

Eps Enthusiast

Eps

Posted
  • Author
Posted

Tested the new replacement relay. It does not work.

Tested old relay. working but low voltage. Cleaned connectors and bent copper to make better contact.

Working.

TLDR; Relay was partially faulty, so was new relay.

I can drive my car again! After putting back together the entire dash hahaha! I'm just happy I know what it is now.

  • 2 years later...
xanavinismo Rising Star

xanavinismo

Posted
Posted

I have pretty much exactly the same problem with my R34 GTR! Indicators and hazards do not work (no lights, no sound from flasher unit) but DOES work when I arm/dissarm my alarm system... hazard light is fully plugged in, fuse for indicators & hazard lights are fine.

I recently cut off some wires that go to the standard Japanese Sat Nav (as it is was unplugged) but after looking at it closer I noticed that the the hazard lights has 8 wires:

  • 3 to main wiring loom
  • 3 to a Sat Nav connector
  • 2 to the head deck wiring

So im wondering why would there would be connections from hazards to sat nav/head deck??

Cheers for any info/help guys!

Eps Enthusiast

Eps

Posted
  • Author
Posted (edited)

I have pretty much exactly the same problem with my R34 GTR! Indicators and hazards do not work (no lights, no sound from flasher unit) but DOES work when I arm/dissarm my alarm system... hazard light is fully plugged in, fuse for indicators & hazard lights are fine.

I recently cut off some wires that go to the standard Japanese Sat Nav (as it is was unplugged) but after looking at it closer I noticed that the the hazard lights has 8 wires:

  • 3 to main wiring loom
  • 3 to a Sat Nav connector
  • 2 to the head deck wiring

So im wondering why would there would be connections from hazards to sat nav/head deck??

Cheers for any info/help guys!

This was in my GTT. I haven't checked out the wires going into the MFD (if that's what you're referring to) on my GTR.

Who knows. But if you cut it and then it doesn't work.......

This ^ If it stopped working exactly as you did this, check the pin out diagrams.

MFD Info: http://www.sau.com.au/forums/index.php?app=core&module=attach&section=attach&attach_id=166053 (from here: )

My alarm basically bypassed the standard relay and fuses for indicators. So that can mislead you.

Maybe check related fuses and then get a relay tester or another relay to test with.

Edited by Eps
xanavinismo Rising Star

xanavinismo

Posted
Posted

But this is what trips me out...

  1. My Sat Nav & Head Unit were both already unplugged (so essentially the wires and pins arent touching or connected to anything right??)
  2. Why would there be wires going from Hazard lights to Sat Nav & Head Unit connections? Shouldnt they just go straight to the wiring loom?

Oh and Eps - No wires are MFD related.

Cheers,

Eps Enthusiast

Eps

Posted
  • Author
Posted

But this is what trips me out...

  1. My Sat Nav & Head Unit were both already unplugged (so essentially the wires and pins arent touching or connected to anything right??)
  2. Why would there be wires going from Hazard lights to Sat Nav & Head Unit connections? Shouldnt they just go straight to the wiring loom?

Oh and Eps - No wires are MFD related.

Cheers,

Ah gotcha. Sorry, don't know anything about the Sat Nav units you describe. Didn't know they existed!

Check fuses in case one blew when you cut the wires. You might need to multimeter the wires you cut if it is still an elusive problem. I can't seem to find much on the wiring for the sat nav.

Check for voltage at relay and fuses and work your way back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...