Jump to content
SAU Community

Recommended Posts

dont take the nut all the way off when i changed my wheel . i tryed beating the back of the old wheel but it didnt budge so with a mate i sat in the drivers seat and jiggled on the wheel while my mate tapped the shaft with a hammer and a bit of timber

thanks jay, I'll give that a shot right now....

the steering wheel is on there pretty stuckly, hope it doesn't bend or damage any parts while trying to force the wheel off though...:-(

if anyone has some first hand experience taking the wheel off without tools (steering wheel puller), let me know how you did it!

cheers

i didn't do my r33 one.. but in the r31 i remember it was a real bitch..

WD40 helped a fair bit.. then just got a big hammer and bashed from the other side a stack. Light taps and then big bashes. Took nearly 40 mins of bashing and swearing. I didn't really like what it was doing to the steering column either but seems to be fine.

Tends to mangle the old wheel though.

i had a bitch of a time trying to take my standard wheel off as well.... you just gotta give it a knock here and there to loosen and break the old glue.... keep giviing it hard yanks till you get it off.

but its all worth it when you get the MOMO on.... trust me :P

that guys for all your imput!

I finally got the wheel off today, after trying everything i/we could think of, I just started pulling really hard and pulled the wheel left then right and after a minute or so....wham, off it came. what a relief!

and yeah, the momo looks awesome. a little bit wierd driving with a smaller wheel, but better! :-)

cheers

I used a gear puller and it took me about 10 minutes to take my wheel off, turn my boss kit around so the wheel would be straight, and then put my wheel back on.

Having the right tools make it so easy. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...