Jump to content
SAU Community

Weird Noise R33 Gtr Vspec

dbking82

By dbking82,
in General Maintenance

 Share

Recommended Posts

SMOKEYV35 Mentor

SMOKEYV35

Posted
Posted

Just don't want to see you get stung .

I am considering a GTR as my next car too, but anything that hasn't had a rebuild I am automatically factoring that into my budget as a future cost. I see it as a question if 'when' not 'if'.

If you're not able to diagnose it - paying for someone who knows their stuff to give it a once over could be a wise investment.

dbking82 Explorer

dbking82

Posted
  • Author
Posted

Yer if I choose to accept the challenge of the car I will be factoring in the rebuild, hence why I haven't bought it yet, and will be taking it to a specialist to diagnose the noise, so far have came up trumps with a video, they all really need the car to sort it out correctly.

SMOKEYV35 Mentor

SMOKEYV35

Posted
Posted

Maybe ask the owner if you can bring someone out to the car and remove the cam gear/timing cover?

Would be an easy way to check for rubbing, belt condition and deflection.

There would surely be a member in your area who would do it on a Sunday arvo for a slab.

AngryRB Grand Master

AngryRB

Posted
Posted (edited)

That noise sounds like what my car does but worse, mine has 180k's , new belt and no cover so be interested to know what causes the noise,

any pics of the car?

Edited by AngryRB
dbking82 Explorer

dbking82

Posted
  • Author
Posted (edited)

Will upload pics tomorrow as busy today and not at home. Pics on phone are too large.

As per k's visually engine bay and noise is not reassuring but everything else looks mint... Under the dust.

Edited by dbking82

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • luke gtr
      Hiya!

      By luke gtr · Posted

      Welcome.  800hp should be a bit of weekend fun!
    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      I'm going with "Just run two gates". Fix the problem conclusively. It's the only way you'd ever truly know, right?. This is all pretty much splitting hairs. Even the extreme example where it takes two whole seconds at 100kmh or something sounds monstrously dubious. And anyway, when you're punching the throttle when you 'need' this power, you aren't at 2800rpm in the wrong gear. Test it at 5600rpm in 3rd gear, when you're traction limited punching out of a sweeper. Much difference there when you account for traction?
    • GTSBoy
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By GTSBoy · Posted

      And the full R32 GTR wiring diagrams are also freely available. Hmm.... there's supposed to be an auto replace that would have linked the thread. Here it is, manually  
    • dbm7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By dbm7 · Posted

      Ahh...should have been clearer ~ there's 2 ... SMJ = super multi junction (connector)...   ...this is connector 6 & 25 in above image -- body harness to engine loom (6) & body harness to main loom (25) Headlights go to front via connector 6 ; fuel gauge goes to tank sender via connector 25  ...like I say this is R33 diagrams, but at a pinch R34 won't be too far different. *IF* the two ground faults are related, this can be the only place where both wires converge (as one runs to the back, the other to the front)... ....thing is, you probably need to establish if the faults are related (unless you examine that area and find obvious chaffing on the looms there to body ground)....*IF* the fuel gauge is still broken (full needle deflection), I'd be headed for the boot, remove fuel sender wire, key on and measure the voltage there ~ it should be roughly 10volts. If that's ok, check sender to ground resistance...if this is a dead short to ground (and there's fuel in it), then sender has failed or something funky has happened to wiring in the tank. edit: ahh...rereading the thread, this is R32....above fuel sender test still valid tho'
    • drifter17a
      Rb25det timing belt position on cam gear

      By drifter17a · Posted

      I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
×
×
  • Create New...