Jump to content
SAU Community

Recommended Posts

Advan/Yokohama are doing a trackday @ Winton as per below.

There is a discounted entry on offer if you are running ADVAN Tyres and also you can go into the NEOVA cup which you can win some cool stuff through.

When: 3rd August

Where: Winton Raceway

Further Detail:

Yokohama is holding two track days for time attack competitors, track day enthusiasts and high performance car owners who have Yokohama ADVAN race tyres (A050, A048 and AD08/R).
Entrants can preview and test the new ADVAN Neova AD08R tyre, arriving through July and August. They can also put down a lap time for the ADVAN Neova Cup 2013 leader board.
There will be a tyre expert on hand to pyro your tyres, to see how well you’re using them, and help you set the right pressures.

Link to the website with more details: http://www.yokohama.com.au/en/ADVAN-Motorsport/ADVAN-Neova-Cup/ADVAN-Track-Days.aspx

I'll attach a flier when i get a smaller version to post.

Enjoy!

Link to comment
https://www.sau.com.au/forums/topic/428446-advanyokohama-trackday-winton/
Share on other sites

Don't be too fast to complain about the price - it's about right. And only taking into account the Yoko Discount price (as thats the entire point behind it)...

It's on a Saturday as well! Costs massively more to hire Winton on a Sat/Sun. Even @ $195 x 55 cars you only just break even :thumbsup:

If spots are capped to 50-55 cars that's a LOT of track time as opposed to loading with 65-70 cars.

Add to that - you can win free entries to WTAC and also Trophies.

Not bad for a 'Trackday' TBH.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...